1999 subaru legacy gt limited the speeddometer works part time and other times not at all. we have changed the head where the spedometer is located and checked all speed sensors and to no avail did anything work. about to change transmissions but not sure that might help or not. any suggestions?
Check wiring and connectors from vehicle speed sensor to computer and also wiring from computer to instrument panel.
SOURCE: 1996 Dodge Grand Caravan 3.3liter with automatic transmission.
It will continue to repeat the same problems because it was not designed right.
SOURCE: 2005 Subaru Legacy: Where are the O2 sensors located (both)
the o2 sensors are locted in the exhaust system. upstream is before cat converter, downstream is after cat converter.
SOURCE: 1999 Subaru Legacy Sedan.. speedometer works
I finally fixed mine, on my 1999 Subaru legacy 30th anniv edition. . .
I removed the speedometer head, and resoldered the green connector on the board. Then I also ran a wire to duplicate the trace wire from the middle pin to the first connect (about 4mm). Problem gone.
email for more details if interested: mike(at)whiteley.org
SOURCE: I need to change the knock sensor on my 1998
sensor are located on mono fold pipe either before cat or after cat just unplug the sensor lead and use proper size wrench and remove sensor
SOURCE: i need to change the knock sensor on my 1999
are you sure it is bad. I had that code and I ran 91 octane with a bottle of sea foam the code went away
80 views
Usually answered in minutes!
×