2008 Infiniti FX35 Logo

Related Topics:

Anonymous Posted on Apr 05, 2012

Color of wire for speed of nisan infinity - 2008 Infiniti FX35

  • Anonymous Apr 06, 2012

    what color of wire for speed and parking

×

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

01 Sequoia wiring color code diagram

  • Black: Ground
  • Blue/White: Power (12V) from HVAC control unit to blower relay
  • Blue/Yellow: Power (12V) from blower relay to blower motor
  • Blue/Black: Ground from blower motor to chassis
0helpful
1answer

Speaker wiring diagram for a 08 dodge 2500 truck with 7 speaker infinity

Never have found good wiring diagrams for stereo's. Bought them and color codes didn't match. I have mitchell and alldata at work, they don't match. I wire them in with a volt/ohm meter. I find B+, Then hook ignition the the heater control wire. Ohm out the speakers. Thing is, you have infinity. You'll have to find the amp and cut the speaker wires and patch them there also, first. Just a note.. All speaker wires are twisted/paired wires. Cut the tape back 4 to 6 inches to find them. Another note. The speaker wires from the stereo to the amp will be a set of colors. From the amp to the speakers will be different colors.
0helpful
1answer

Where is the radio speed sensor wire on Hyundai/Infinity model 96560-0A500 radio?

sounds like either a call to dealer service to try for an answer or a car audio store for some help..good luck..
0helpful
1answer

What color wire supplys power to a window swich 2004 infinity fx35

pin 19 in the master switch white wire, dont power it up manually you can blow up the 700.00 body modual
0helpful
1answer

Location o2 sensors 94 Infiniti J30

There will be one on each side of the lower part of the engine on the catalysts, and then there will be two more on the exhaust tubes roughly halfway between the engine and the muffler. You should be able to look at the top of the engine and see four connectors with colored braided wires. They should be white, red, blue and black. You can trace those wires directly to the O2 sensors. 
0helpful
1answer

Wiring colors from head to amp

Check here, this guide might have what you need.

http://www.installdr.com/InstallDocs/Jeep/PDF/533013.pdf
2helpful
1answer

1997 Jeep Grand Cherokee Factory amplifier

I have the file on my other computer - search other bulletin boards. Check with Crutchfield help desk.

Input wires are the speaker wires from the Amp head/receiver (so you can go to a BestBuy and ask them for the speaker wire colors). Black is ground. Yellow/black is main power. Blue/white is turn on wire. If in doubt take off the door panels and look at what color wires go to the speakers.
Not finding what you are looking for?

73 views

Ask a Question

Usually answered in minutes!

Top Infiniti Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

926 Answers

Are you an Infiniti Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...