I am working on this RIGHT NOW. Remove panel (see Utube) remove white cover (Torx 25) from interior of exterior handle. You will see that lifting the handle pushes a rod down The rod is attached to the bottom half of the mechanism via a cheapo plastic connection, that can work loose. It is like a screw shaft (top) that squeezes (sideways) into a blue plastic channel which merely pinches the "screw shaft" to hold it. The connection has come loose. Squeeze upper shaft into (lower) blue channel. Added tiny bit of epoxy to bond "screw shaft" onto blue plastic gripper. Done. Saved $500.
SOURCE: Just bought a used 1998
obvious and thats because someone has damaged the lock ,go to dealer and order a new lock for that door with the chassis number and change the lock ,unless the back of the lock mechanism is damaged do the keys turn in the lock and nothing happens or wont they do into teh lock??
SOURCE: Inside driver's door release catch will not open
The little rod from the inside release catch to the door lock has been broken/come loose.
Take out the door panel and see what is the problem. Then either fix it or let someone to fix it.
SOURCE: 1999 volvo s70 will not start sometime after door unlock
Try to check the battery and the alternator and the fuse make sure the battery connector is not loose.
I’m happy to assist further over the phone at https://www.6ya.com/expert/ramy_d9e7ebea3891f482
1,987 views
Usually answered in minutes!
×