SOURCE: Nissan Almera Tino Diesel 2.1 - Temperature control not working
Hi there, very common on these vehicles, you need to remove the heater cotrols and check that the cable hasn't come out, usually the clips that hold the cables in place break causing the heaters to not work properly, Nissan do modified clips now to stop it from happening, it may need a cable too if its too far bent, hope this helps.
SOURCE: nissan almera 2003
This is on the air/fuel sensor that is mounted in the exhaust manifold right behind the radiator. You will need to remove a heat sheild to see it but you should see the wires coming out of it. Also a spiecial socket is needed to get it out without damaging the wiring.
SOURCE: blow heater in car not working
Hi it is either your blower motor relay or your blower motor itself.
SOURCE: how to find the heater resistor for a nissan
the majority of heater resistors are on the heater box under the passenger ide of the dash, on some very few models it is part of the actual ac control panel
379 views
Usually answered in minutes!
Do you have airflow at the dash but no hot are?
×