I lost driving power while driveng. i have no driving power in 2 high or 4 high but i can drive in 4 low. i wasnt sure if i messed up something in my transfer case and if so what could be wrong. it has a manual transmission and it goes into gear with no problems. it just wont drive.
On website www.reliable-store.com has the largest collection of repair, service, parts manuals
of any vehicle on earth. Best website I came across for repairing, servicing or manuals.. Very helpful website
SOURCE: 01 dodge 1500 4x4 Transfer case / transmission problem
check the rear differential as well as the transfer case...you may have broken something in both of them...i have seen it happen...since 4low uses a different gear it is possible for it to move in low and not 4 high
SOURCE: Grinding in and out of 4 wheel drive
You say 'new' truck, 09? or new used? I have had 3 Fords, 3 w/ manual trans. case, if you go into 4x4 Low range, you must come to a complete stop before shifting the trans. case to 4x4 mode, and I always put trans (automatic) in neutral before slipping into 4x4, it engages smoothly, no grinding. 4x4 high range can be put in while moving, but I would let off the gas pedal, shift to 4x4 high range, then resume accelerating. If there is any grinding going on doing it as above, something isn't right. Check the trans. case fluid level also, to make sure that's not an issue.
88 views
Usually answered in minutes!
×