2004 And 2005 There is no bypass pulley manufactured, even though all of them come with AC. but I am learning although mechanics dont want to admit it, if you remove the ac pump a shorter belt WILL work, in fact it will work (very temperorerly because there is a slight rub) without the removeal of ac pump. but a 15 milmeter wrench will get it home to remove the AC pump about 4 hours labor. Orielly's master pro K060815, Auto Zone 822K6, or preptstone 825K6 will work.
GOOD LUCK FRIENDS
Thank you very much for this post it was very helpful. Just an update to this post, the serpentine belt at Autozone has an updated part number. It is now 825K6. 822k6 is the old number and the 825k6 is about 0.3 inches longer but it still works perfectly. I just bought one for my 2005 Ford Taurus Se Sedan OHV.
×
I had to use a 69 1/8 Oc belt the ones post are to big. I used master pro k060 685 from O'Reilly auto parts
How much money is it
I just went through the same but put a 79 inch belt on, prob could put 79.5 inch cause the 79 was tight.
2005 Ford Taurus SE 3.0L Vulcan engine
SOURCE: need to bypass ac compressor
Hi yotaguy,
You will need to buy a By-Pass pulley, due to the placement of the other pulleys you will not be able to eliminate the ac and still run the correct routing of the belt.
I will research the price of the pulley and post it here.
Please rate this solution, the only compensation I receive for my time is the knowing I have helped and the rating I receive here on Fixya.
Lone99star
Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/jason_77a19afa8d604dee
SOURCE: what size belt bypasses ac compressor on 2001 ford
I just went threw the same thing. I found that Auto Zone's 822K6 belt fit perfectly. Hope this helps you
SOURCE: Can I bypass ac compressor
You can go to an auto parts dealer.They sell a bracket with a pulley that takes the place of an a/c compressor and allows you to use the same size belt It's available at a place like NAPA or Autozone.
SOURCE: I need instructions and a diagram to bypass the ac
simple trick provided you can do this by running some twine around your pulleys allowing for1-2 inches less for slack adjuster an that will pretty close.or they may have for that system without ac meaning the condenser unit.
10,875 views
Usually answered in minutes!
×