2001 honda civic car timing gears position

SOURCE: 2001 Honda Civic door lock

If there is nothing jammed in the barrel, you will need to pull apart the lining of the interior of the door, disconnect the power motor for that switch, then see if it locks by key, sounds like the motor is seized, of out of allignment, easily fixed with a second hand or reco motor, or witha simple adjustment. Good luck, hope it helps.

SOURCE: Car is making a "whirring,

Does it seem worse when turning? If so, check your axle cv joints, they make a clicking noise (especially when turning) when they are shot. Next check wheel bearings. Let me know what u find. good luck

SOURCE: Replacing crank shaft position sensor on 2000 Honda Civic

http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c1528018f5b9

SOURCE: 2001 Honda Civic Timing Belt

It is not an eays job. I would have it done by a tecknician so you have a warranty. The honda dealer is your best bet because you will oem parts and the job will be done right . then you are good for another 90,000 miles. I hope this helps. Don't forget to rate my answer.

SOURCE: i have a 2001 honda civic took it to autozone and

TDC top dead center sensor. Tells when the #1 piston is at top dead center position.
P1361 Intermittent Interruption In TDC 1 Sensor Circuit