ADESBRIBITOR PRICE I NEED TO KNOW HOW MUCH IT COST

3 to 4 hours. price verys

valve job ,or hydraulic tappets ,because modern vehicles use stelite coated valves and seats and they never wear out of need grinding as a rule unless it has a million miles on the clock and even then i doubt if they would need doing

The parts for the inner and outer together is around $80, (all 4 joints) labor to install should be about 2 hours plus alignment, I would say $220 is a good price for that work. Just make sure that price includes a new alignment. Hope this helps, let me know.

Hi Gcg_77,
You will need to contact your local auto parts store to get price for the tie rod ends.My flat rate manual listed them at $65 a piece but this is an old price.
The labor time listed for these are as follows:

1 inner tie rod end is listed at 1.4 hours,if you replace both it is listed at 2.0 hours.
1 outer tie rod end is listed at 1.1 hours,if you replace both it is listed at 1.4 hours.
These times include resetting the toe only. If you want a complete alignment you deduct 0.4 hours labor and charge full alignment price.
Hope this helps. If you need anything else,let me know. Thanks,Chuck

Fuel pumps can cost up to $200. And it is more than likely in the gas tank. They will have to drop the tank to fix it. I payed $140 in labor on my 91 buick.

http://www.rockauto.com/

I'm not promoting this website but it's easy to navigate and will give you an idea on price of parts.

HI here is a place you can get price for a used one www.car-parts.com a new one is from 360to 700 dollars

Depending on where you live, there prices are very good. Where I live, we can't find repairs for less than $78 per hour and body shops generally charge in the area of $120 per hour.

$7,000.00 for a new clutch.

$6.95 per mile to maintain.