Want to replace the rear window motopr
Due to the age I can only offer a generic solution. Please follow the link. how to replace power window motor part1
SOURCE: rear driver side window will not go up.
The window has slipped of the track.Try moving it up and down, back and forth. Gently. Try it.
SOURCE: Need diagram on how to R&R rear door panel 2002 Cadillac Seville
You can either go to google ebooks and find a free repair manual for your car, or go to autozone.com and register for free online repair manual.
You will need to remove all screws, then remove window and lock controls, then take large flat-tipped screwdriver and gently pry next to all the plastic studs that hold on panel to door. Once all panel is pried up and loose, just pull straight up and lift off. Then remove plastic without ripping the middle, (You can stick back on later) then you will have access to window motor. It is a 12 volt motor.
Testimonial: "Thanks for getting back so fast. After doing a little more research I've determined it's beyond my capabilities. Have a great day. Steve"
SOURCE: 2004 deville passenger front and rear power windows
hello there:
you may have to disassemble the door panel and check to see if the cable going to the actuator has come off if the cable is there and mounting looks OK you may need to replace the actuator its a simple procedure to do and it's just as expensive to replace the motor and actuator together at the same time the reason for this is to resolve future problems.... hope this helps thanks
111 views
Usually answered in minutes!
×