1998 oldsmobile regency water pump install procedure

SOURCE: how do i install a 1998 oldsmobile intrigue water pump?

you need to go buy a Chilton. There is a litle more to it than telling you a couple of things on a web page. Also if your car has a 4 cylinder and you are replacing the water pump, something they don't tell you is you have to replace the timming belt also. If you don't you will be replacing them both again in a couple of months.

tepfy

SOURCE: how do i remove the power steering pump on a 1992

Remove the belt, Remove the 2 bolts that hold the pump to the engine by using a socket and extension through the hole in the pump pulley. Remaove the 2 hoses. you may have to pull the pump out through the wheel well.

SOURCE: 1998 oldsmobile regency oil capacity

4.5 quarts of oil including the filter. that is assuming you have the 3.8 lliter v6 engine.which is standard. you can put about 1/4 quart of oil in the filter and then screw it on the oil filter housing. this will help eliminate a dry start condition when you crank the engine over after changing the oil and filter. put the remaining 4 quarts in, run the engine for 30 seconds and then check the oil level to top it off.

SOURCE: changing air filter on 1998 Oldsmobile regency

the filter is in the filter box next to the battery eather unscrew the screws if it has them or pop the clips it will open replace the filter

SOURCE: 1990 Oldsmobile Ninety-Eight Regency Brougham

if you are not experienced mech. maybe you should take it to one