Where is the iat sensor on a 2001 elantra gt

Edited the question into English with the correct make and model of the vehicle! :>D

Fuse box diagram. They use abbreviations
C/LIGHT 15A Cigarette lighter, Power outlet

Fuse Box Diagram Hyundai Elantra (XD; 2000-2006)

https://fuse-box.info > hyundai > hyundai-elantra-xd-2...

The fuse box is located on the driver's side of the instrument panel behind the cover. The location of the fuses in the passenger compartment: Hyundai Elantra (XD; ...

Fuse box Hyundai Elantra 2000-2006 - Fuses box diagram

https://fusesdiagram.com > hyundai > fuses-and-relay-h...

Fuses and relay Hyundai Elantra 2000-2006 ... For the Hyundai Elantra 2000, 2001, 2002, 2003, 2004, 2005, 2006 model year. Fuse box located. The fuse box for ...

IAT sensor only has 2 wires ,intake air temp. Maf sensor has 6, mass air flow

the sensor is on top of the passenger side drive shaft in the diff housing

For Hyundai Car 1999-05 - Intake Air Temperature (IAT) Sensor Location (check several options):

1.- The IAT sensor is located against the firewall to the left side of the engine. It is combined with the Manifold Absolute Pressure (MAP) sensor.

2.- This sensor is located in the air intake plenum assembly. On some vehicles this sensor is combined with the MAP/MAF sensor.

3.- The IAT sensor is located in the air plenum assembly. On some vehicles it is combined with the MAF sensor.

4.- This sensor is located in the air intake plenum assembly. On some vehicles this sensor is combined with the MAP/MAF sensor.

5.- This sensor is located in the air intake plenum assembly. It is combined with the Manifold Absolute Pressure (AFS) sensor.

6.- This sensor is located in the air intake plenum assembly. It is combined with the Manifold Absolute Pressure (AFS) sensor.


In the next graphic, check the position 2...



FIG : Underhood sensor locations-Elantra 2004-2005 2.0L engine


Hope this help (remember comment and rated this) TY for using Fixya.

I'm sending you a illustration of the IAT Sensor location only 2.4L engine.
Mitchell on demand does not have a illustration for the 3.4L engine but they say its at left side of engine compartment. I hope this will be of some help.

Try unplugging and plugging the map sensor, this device should have manifold pressure hooked up to it, via hose, so check for cracks or leaks. Then clear codes and test again.

IAT stands for Air Intake Temperature Sensor and it is located in the intake tube coming from the air filter box tot he engine. Easiest way to find it is look at the top of your engine where it says 2200. Coming right out of that manifold is a black ribbed tube about the size of a baseball to softball. It should be going towards the direction on the front drivers side. on the back side of that tube, about 4 inches away from the intake manifold (the things that says 2200) is a plug with wires. That is your IAT Sensor. If it is unplugged, plug it back in. Otherwise unplug it and replace it. Make sure to disconnect the battery while you do this so the computer resets itself after the new one is installed. Thanks and please don't forget to rate!

ELANTRA(XD) > 2001 > TCS > TRACTION CONTROL SYSTEM
C1611 EMS Time-out failure
C1617 EMS Invalid Engine Speed
ELANTRA(HD) > 2007 > ESC > ABS/ESC > C1611 CAN time-out EMS
Seems you may have a wheel speed sensor (right front) which has come apart and is rubbing up against the 'tone wheel' on the axel shaft.

I just came from an Autozone, and then spoke with 2 Hyundai dealership service departments and they all three stated the P0113 code is the Intake Air Temperature sensor (IAT, also referred to as the Mass Air Pressure - MAP - sensor) on the engine, not an O2 sensor found in the exhaust system.

it is the air Intake Temperature Sensor located at the air cleaner housing.