Torque spec on head for 1986 civic si 1.5liter

ZJ Limited

• 17989 Answers
• Posted on Aug 05, 2011

SOURCE: 99 Honda civic 1.6 engine

Tighten the cylinder head bolts to their final torque specification in two steps. Use a crisscross sequence starting with the bolts at the middle of the head and working toward the outer bolts.

1. Step 1: Tighten each bolt to 22 ft. lbs. (30 Nm).
   
2. Step 2: Tighten each bolt to 61 ft. lbs. (85 Nm).

SOURCE: Replacing head gasket on 1995 honda civic, require torque specs and secquence

7.3 ft.lbs Go from middle, to back right, to back left, to front right, to front left. if your standing in fron of your header.  11 or over usually shears the bolt.(if you have stock bolts)
Make sure you dap some rtv on the sharper 4 corners of the gasket where the cam seals are.

James Mac

SOURCE: spark plug torque for honda civic si?

Spark Plug Type NGK: PFR6F-11 DENSO: PKJ20CR-M11 Gap 1.0 - 1.1 mm (0.039 - 0.043 in) 1.3 mm (0.051 in) Torque 18 Nm (13 lb ft)

SOURCE: head bolt torque specs for 200 honda accord 3.0

its a three step process 1st 29ft/lbs 2nd 51ft/lbs 3rd 72.3ft/lbs

walleyracing

• 76 Answers
• Posted on May 03, 2010

SOURCE: hi what is the head torque on a 2002 honda civic

Dont forget to apply clean engine oil to the threads of each bolt for proper torquing. Then finger tighten. Then