2003 Mercedes-Benz E-Class Logo
Posted on Nov 02, 2008

E270 cdi trunk lock does not work with the remote and inside trunk lights and the number plate lighgts do not work

  • Anonymous Mar 23, 2014

    When opening boot lid the number plate lights go out, when shutting the boot lid the number plate light and the boot interior light comes on

×

2 Answers

Anonymous

Level 1:

An expert who has achieved level 1.

Mayor:

An expert whose answer got voted for 2 times.

  • Contributor 1 Answer
  • Posted on Nov 10, 2008
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

Mayor:

An expert whose answer got voted for 2 times.

Joined: Aug 04, 2008
Answers
1
Questions
2
Helped
793
Points
2

Hi

I had a similar problem on my e270 cdi and fixed this by earthing the 3rd brake light . This has solved the problem . No more errors like : 3dr brake light and numbret plate light malfunction ...

Aubrey
[email protected]

Anonymous

Level 1:

An expert who has achieved level 1.

  • Contributor 1 Answer
  • Posted on Dec 16, 2008
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

Joined: Dec 16, 2008
Answers
1
Questions
0
Helped
793
Points
1

There is black melted plastic mess on top of injectors,and air blowing through it

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
2answers

Dead battery so trunk won't open

You should have a trunk lock cylinder in the trunk lid. Look to the right side of the license l plate by the license plate light and you will see a black plastic cover. Remove the cover to expose the lock cylinder then use your key.
0helpful
1answer

Dead battery in locked trunk (Mercedes 1990)

Many People don't know exactly how to use the manual key attached to your remote to open the doors and trunk in case the battery is dead. All you have to do is slide the locking button in the back of your remote and pull the metal pre-cut key, then insert it in the trunk lock, turn key to the left and then push in. kawaboongha!!!
0helpful
1answer

I need the manual book for mercedes e270 cdi avantgarde model 200

how to reset the service light on mercedes benz e270 cdi avantgarde
1helpful
2answers

Boot not opening with remote or indoor lever third brake light not working told by merc could have broken wire but i want to try fue first but cannot find which fuse no diagram eclass 220 cdi 06

okay the dealer may be right,the wiring sometimes breaks from opening and closing trunk,the trunk release operates on the same power as door locks, if door locks work its not a fuse,check the wiring harness in the trunk near hinge, this system is a complex one,so if you dont see a broken wire in the harness,(you will have to untape the wiring to see every wire) have a tech check the system.
0helpful
1answer

2004 E270 CDI Battery light visit workshop

I had the same problem in me 2004 cdi e270. Check the voltage going to the battery when the car engine is on. Stedy charge of 12v should be going in to the battery, if the voltage is volitale say between 11v to 14v then it your Regulator (which is attached to the backend of the alternator). You need to change alternator and then unplug all the batteries over night and re plug them back again. The problem should go away.
0helpful
1answer

MERC E270 (2004)

There is usually a fuse box in the spare wheel compartment, there is also one under the rear ,Owner's manual indicates fuse position
0helpful
1answer
0helpful
1answer

Power lock , interior top light, Trunk button are not working

Your vehicle is not a Hyundai Elantra -- problem solved!
0helpful
2answers

2002 Mercury Grand Marquis. Backup lights won't work

Does pushing the trunk release button make the back up lights illuminate? Has the car been serviced or wrecked before this problem? Have you been golfing and put clubs in the huge trunk. Either the ground wire for the trunk lid devices is bad or the trunk release wire (purple/orange) and the reverse lamps wire (purple/white) have been reversed.
0helpful
2answers

1997 C320

There should be a key hole for your ignition key to fit just above the number plate along side the number plate light
Not finding what you are looking for?

803 views

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...