At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Not starting with self start then we pushing the car and start it.
Once stop never start again with self start.
Again we have to push the car and then it started.
headlight is ok so no battery problem.
When I turned key to start it gives audible noise from hood like click, click....
Plz suggest me condition when its time to change oil or water in car.
Your starting problem may be battery charge level. Take buy a auto parts store, most will measure the battery charge condition and may recommend a new battery, They will also measure the status of the charging system, which if not adequate, will contribute to the poor battery charge and starting problem. If the battery condition is good or very good, you may have a Starter solenoid or starter and solenoid problem.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Does the red light on the remote light up when you push any of the button if no, replace remote if yes, then try repograming the remote to the car again. -Have remotes' ready. if you have two then fob#1 and fob#2 (doesn't matter which one is #1 or #2) -each step has to be done within 5 sec or it will not work, but don't do it super fast. 1.turn key just to the "on" position (not starting) and push "lock button " on fob#1 once and release 2.turn key off 3.turn key just to the "on" position (not starting)and push "lock button " on fob#1 once and release 4.turn key off 5.turn key just to the "on" position (not starting)and push "lock button " on fob#1 once and release 6turn key off 7.turn key just to the "on" position (not starting) and push "lock button " on fob#1 twice (if you only have one fob, then stop here and go to step 8)and push the "lock button" on fob#2 twice. 8.turn key off and remove key from ignition. if you did it right, remotes' should work again. good luck
First thing, does the red light on the remote light up when you push any of the button
if no, then replace battery inside remote
if yes, then try repograming the remote to the car again.
-Have both remote ready. fob#1 and fob#2 (doesn't matter which one is #1 or #2)
-each step has to be done within 5 sec or it will not work, but don't do it super fast.
1.turn key just to the "on" position (not starting) and push "lock button " on fob#1 once and release
2.turn key off
3.turn key just to the "on" position (not starting)and push "lock button " on fob#1 once and release
4.turn key off
5.turn key just to the "on" position (not starting)and push "lock button " on fob#1 once and release
6turn key off
7.turn key just to the "on" position (not starting) and push "lock button " on fob#1 twice (if you only have one fob, then stop here and go to step 7)and push the "lock button" on fob#2 twice.
8.turn key off and remove key from ignition.
if you did it right, remotes should work again.
good luck
It might have something to do with your mass/air sensor located on the intake tube. Try cleaning the mass air sensor with the appropriate cleaner and also try cleaning the throttle body with carb cleaner.
the **** way is to diconnect the neg batt term for a few mins, then put it back on...don't be afraid to try it.... it takes your car only a few minutes to relearn what it is supposed to know....works everytime
Most likely it is your alternator and that would need to be replaced. I
will give the website on how to remove and install the alternator, but I need to know the Model of your Mercedes-Benz.
I am also having same problem
I am having 800
×