SOURCE: Front Hub Bearing Torque specs to complete replacement
THE LUG NUT TORQUE SPEC - 140FT/LBS\
CALIPER MOUNT - 80FT/LBS
CALIPER BRACKET 129FT/LBS
AXLE NUT 177FT/LBS
SOURCE: trying to change alternator on 2004 chevy silverado 4.3
There should be a tension pullie that you put a wrench on and turn it and the pullie will kind of fold back on a spring so you can remove the belt
SOURCE: bolt size for 96 chevy front caliper
2002 Trailblazer - 4 bolts on caliper. I loosened the top bolt with the pin, but when I try to loosen the bottom, it feels like I'm tightening it. Do I need to loosen all 4?
SOURCE: Replacing front wheel hub assembly on 2006
Caliper mount bolts are 74 ft/lbs
Driveshaft axle nut is 177 ft/lbs
Hub and bearing mounting bolts are 133 ft/lbs
Testimonial: "The info on the torgue specs was very helpful. I couldn't find it anywhere. Thanks a bunch!"
SOURCE: cannot remove rear brake caliper
Try using a "c" clamp and push the piston in all the way on the caliper. Take the lid off the master cyl first. Lee
81 views
Usually answered in minutes!
×