Cars & Trucks Logo

Related Topics:

A
Anonymous Posted on Feb 22, 2012

How do i fit towbar electrics to range rover sport

Were do the brackets fit and were do the electrics plug in

5 Related Answers

Anonymous

  • 510 Answers
  • Posted on Mar 27, 2009

SOURCE: How do you reset the service mileage light on a

e mail [email protected] for download

Ad

Anonymous

  • 3600 Answers
  • Posted on Jan 22, 2010

SOURCE: How do you fit an 06 Range Rover door mirror?

Is there three plastic caps about where the bolts re or does it have the little plastic trinagle cover over the corner of the mirror?

janman

  • 369 Answers
  • Posted on Jan 24, 2010

SOURCE: how to fit angel eyes to a range rover sport

you are not suppose to remove the lens cover, they are glued on, but if you really want to do it, you can try and use a diy blade and separate the cover and the lens, but it is not reccomended,

Testimonial: "ok thanx for your help"

Anonymous

  • 9 Answers
  • Posted on Feb 25, 2010

SOURCE: HOW DO YOU RESET SERVICE LIGHT ON A 2006 RANGE

reset service light. The SIA information is stored in the instrument cluster EEPROM and can only be reset by using T4. (Dealer tool)

Anonymous

  • 1 Answer
  • Posted on May 24, 2010

SOURCE: range rover sport electrical problem

my sunroof wont close automatically as it used as i have tried to fix a problem by keep pressing the sunroof for 30 sec so as the sunroof would tilt and adjust itself, is there any fix model is 2010 rrs

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

2004 series 3 BMW 316i fitting a Towbar mainly how to remove rear valance

you shouldnt need to remove the rear valance to fit a towbar ,i would suggest you contact a authorised towbar fitting workshop as it is not permitted to fit a towbar yourself ,it has to be done by a company with the correct authorised dealership as the towbar has to be certified with a europeon certificate of homoglonation and a plaque .then vehicle has to be presented at the vehicle inspection station for conformity .Then the paperwork of the vehicle changed to show its fitted with a towing hitch and a fee paid for this service .alicantecoli_18.jpgalso the electrics have to be connected by a auto electrician as every annual vehicle inspection the electrics are tested as well where a towbar is fitted .
0helpful
1answer

How do i fit a towbar to a landrover discovery 2

towbar on a disco 2 is a straight forward bolt on job it attaches to the rear chassis and crossmember any good quality towbar kit will come with all bolts and washers you need plus instructions . if you get genuine landrover electrics they plug straight in without having to cut or join any wires.

hope this helps
0helpful
1answer

HOW DO YU RESET THE BRAKE PAD MONITOR AFTER FITTING NEW PFRONT PADS ON A RANGE ROVER SPORT 2005 55 PLATE 2.7tdv6

short the two wires in the sensor cable together and either solder or tape up i broke my sensor and this cleared my fault but only had sensor on left so check both sides.
1helpful
1answer

2006 Range Rover Sport heater and A/C fan do not

Check all electrical conections. If they are good then it is probably the switch itself.
2helpful
1answer

How to fit angel eyes to a range rover sport cant get the lens covers off the headlights

you are not suppose to remove the lens cover, they are glued on, but if you really want to do it, you can try and use a diy blade and separate the cover and the lens, but it is not reccomended,
3helpful
1answer

How to fit a megan towbar 54 reg oasis

Firstly you need to know the make of the towbar, then you can download the fitting instructions from the towbar manufacturers website. As far as electrics are concerned, I would recommend NOT using the secondhand electrics that you have unless you have a dedicated plug-in wiring kit as the wires were probably cut and may now be too short to use and the sockets may not be in tiptop condition, It's well worth the small expense af replacing them. The actual wiring will depend on what year and model the car is.
2helpful
1answer

Cant find the towbar electrics plugs for x-type

I assume that the towbar didn't come with a proper wiring kit as, unfortunately there is not a specific connector for the towbar wiring on the x-type, the proper Vehicle Specific Kit plugs into the rear light. There is a power connector with three pins on the left and a grey reverse sensor cut out connector also on the left. but you will either need to use a Vehicle Specific Wiring kit (about £175) or use a bypass relay system.
0helpful
1answer

Fitting a standard towbar wiring kit to a 1998 rover 420

There should be a wiring harness under the kick panel under either the rear of the vehicle right next to the light (plugs into adapter) or it is under the kickpanel on the passenger side of the vehicle where there foot would be next to the door under the dash
1helpful
2answers

Volvo V70 2001.. Plugs For Towbar Electric's??

You can get an adapter that fits in to the 13 pin socket that give you a 12N socket, easily available on E-bay

http://cgi.ebay.co.uk/13-to-7-Pin-Adaptor-for-Euro-Style-Towbar-Electrics_W0QQitemZ110303426204QQihZ001QQcategoryZ36631QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

I have one for my car and it does the trick
Not finding what you are looking for?

232 views

Ask a Question

Usually answered in minutes!

Top Land Rover Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Land Rover Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...