I have replaced thge egr valve and egr pressure senser and the egr vaccum soilond and i just replaced the idle air contol and the power steering pump and starter and spark plugs and wires and fuel filter and the ac compprsser the van starts up fine when dring and making a turn either way my van stalls out i am running out of ideas please help with any ideas thanks
To me that sounds like a charging issue. With the other items replaced, check and make sure a wire for the alternator didn't get misplaced and if that all looks good you may want to have the alternator tested. Could be something as simple as a wire getting swung into another area while you turn and shorting out, but since it needs to be jumped after it occurs to me that sounds like a charging issue.
SOURCE: windstar van stalls while driving
Inspect Carburetor Dirty and Improperly Functioning Carburetor. Inspect Carburetor Incorrect Carburetor Adjustment. Inspect Carburetor Worn, Faulty or Damaged Carburetor. Inspect EGR Valve EGR Valve Sticking Open/Leaking. Inspect Idle Air Control Valve IAC Valve Sticking or Faulty. Inspect Mass Air Flow Sensor Damaged, Loose, or Faulty Mass Air Flow Sensor or Circuit Inspect FreshAir Intake Hose Clogged or Damaged FreshAir Intake Hose. Inspect Throttle Position Sensor Faulty or Incorrectly Connected Throttle Position Sensor. Inspect Fuel Filter Clogged or Dirty Fuel Filter. Inspect Fuel Injector Dirty or Worn Fuel Injectors.
SOURCE: stalls out when turning
a buddy of mine had an f-150 that did that.his ignition wires in the stearring column were shorting out.
175 views
Usually answered in minutes!
×