I need assembly instructions for kidspace metro mid sleeper bed

Hello, Danielle -

I have not found assembly instructions online for you make and model of bed.

Therefore, I suggest you contact the Acme furniture company directly and ask Customer Service about the availability of assembly instructions for the Louis Philippe bed, model #19520q.

This is the link to the Acme Corp. Contact Us page:
https://www.acmecorp.com/contacts/

Use the form on that page to send an email message.

Best wishes.

You have an in-tank fuel pump, I believe. The easiest way is actually to remove the bed, if you can get someone to help lift it off & on. Pump is mounted through the top of the tank. You can drop the tank if you want, just empty it as much as you can first to make it a WHOLE lot easier. Once you get to where the pump goes into the tank, tap the locking ring around until the pump assembly is freed, the pull it out. The new pump should be a complete assembly replacement, so just slide it in, tap the retainer ring back on, and reinstall tank or bed.

cant find any parts or after market support for the cyber
try ebay or hardware store for possible alternatives to the clips required

worth an ask even if you got the bed second hand

this seller offers a
Home assembly (assembly service available)
Kidspace Cyber Mid sleeper Kids Bed Frame bed frame with premium mattress...

this is in the operators guide. (get one?)
R&R

1. Disconnect the negative battery cable.
2. Remove the screws from the license plate lamp assembly.
3. Remove the license plate lamp assembly.
4. Remove the socket from the lamp assembly.
5. Remove the bulb from the socket.
6. Installation is the reverse of removal.

Candy:

I really need to know what type of engine you have to give you specific help, but this link should help, and it even has a diagram. Hope it helps out.
http://geometroforum.com/topic/2930324/1/

As all these plug ins will pull considerable power I would be looking for a fusible link near the battery or near the main fuse box. Contact Mack service centre for how the sleeper is wired and where the main power comes from

Most bed frames you buy come with assembly instructions. Assembly is usually very simple. Usually most of the frame is put together and all you have to do is link two parts in the middle of the front and back of the frame.
----------------------------------------------------------------------------------------
KWP2000

hiya did u manage 2 sort out an instruction book iv just bought a bed with no instructions so any help would be well appreciated thanks

Need to pull off wheel the brake assembly to free up the axle. They snap into the transmission so will need to **** to pop them out.

Starter motor assembly

In here can find one guide about replace the Starter in a Geo Metro