1996 Ford Crown Victoria Logo

Related Topics:

Back light will not turn off

My car's brake light will not turn off and i turned off the lights

5 Related Answers

Anonymous

  • 1489 Answers
  • Posted on May 04, 2009

SOURCE: brake lights stay on

It's probably a stuck brake light switch. Look around the brake pedal for the switch -- it could be dirty or broken or loose from its mount and jammed against something.

Ad
co7196

Ned C Cook

  • 3433 Answers
  • Posted on Jun 23, 2009

SOURCE: back lights and interior lights won't work

you have a bad ground. ck the engine to body grnd usually on the back of engine and screwed to the firewall. Short narrow strap. Good luck.

Anonymous

  • 5 Answers
  • Posted on Nov 11, 2009

SOURCE: dash lights-turn signal and rear lights

Access your fuse box and check the fuse labled- rear tail lgts,turn sgns, that fuse is blown, replace the fuse with the same value fuse, while your under there, on the fuse box or next to it you'll find 2 round plug in components, about the size of a Marshmellow, one of these is your flasher unit and the other is for your turn signals, replace both of these, even though one may work, it's just good sense to replace both, that shoud fix your rear lighting problem. good luck.....

Anonymous

  • 2309 Answers
  • Posted on Dec 06, 2009

SOURCE: can't shift out of park

a bad brake light switch which also controls the neutral safety switch, its on the upper brake pedal

Anonymous

  • 8 Answers
  • Posted on Dec 01, 2010

SOURCE: Ford Taurus Sedan 2002 -

the switch under the break pedal is stuck you probably have to replace

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Why aren't hazard lights or brake lights working?

Brake lights /rear hazard lights not working - Ford Truck ...

www.ford-trucks.com > ... > 1967 - 1972 F-100 & Larger F-Series Trucks
Jul 9, 2010 - After checking the brake lights I tried the emergency flashers and found that they are working in the front but not in the back. I do have rear turn ... 1995 F350 Brake Lights / Turn Signals not working
Jul 9, 2012
Turn Signals and Brake Lights Do Not Work
Mar 10, 2012
Turn Signal, Brake Lights, & Rear Hazard not working
Aug 3, 2010
Rear Turn Signals, Hazards and Brake Lights not working....
Aug 29, 200
0helpful
1answer

GMC Envoy 1999 -Brake lights not working (sort of).

I would sugest a bad earth, 1st remove the brake globes & see if the sockets that house them are rusty, if so clean with emery paper & refit globes. See if this works 1st. ps don't forget to clean the globes contacts to
1helpful
1answer

I changed the fuse as the turn lights and hazard lights were not working but all other light including brake and interior worked. Now the hazard light stays on and I cannot turn it off. can you Help p

if your hazard lights stay on, you may have a problem with the hazard switch on your stearing collum. try moving it back & forth several times, eg. on, off, on, off always ending @ off & see if that works. they do get sticky @ times. your brake lights will work but your turn signals won't work properly with the hazard switch turned on. let me know if problem persists & will see if i can help you more. good luck.
0helpful
1answer

My brake lights stay on until I begin to press the brakes my car. When I press the brakes on my car, the brake light won't turn on and won't turn back on. Does this mean I need to replace my brake...

on your brake pedal yuo have a switch to turn off the brake lights when not in use and when depressed turns on yuor brake lights. i would suggest either trying to adjust them on the pedal and if not replace the switch.
0helpful
1answer

Brake lights aren't working changed fuses and bulbs could it be the turn signal light switch?

the turn signal light switch has nothing to do with the brake lights,the problem is most likely the brake light switch which you should find around the area of the brake pedal it may be faulty or has come loose & needs to be adjusted & tightened back up........hope this helps......cheers.
1helpful
1answer

Brake lights & Hazzard lights don't work; fuse ok... High mounted center brake light works... Turn signals work...suspect problem is multifunction lever Power drain to battery constant...2...

As for the brake lights push brake pedal down while pushing on and wiggling the hazard switch.If the brake lights come on then replace the multi-function switch.
0helpful
1answer

Have issues with trailer lights. Both turn signals on trailer flash when I use left or right turn signal. Have 7 pin factory plug. Lights on trailer work fine, hooked up to 97 Silverado. Act funny on 2000...

Standard wiring colors are as follows:

4-Way

5-Way

6-Way

7-Way

Green

Yellow

Brown

White

Red

Blue

Purple

Right Turn & Brake

Left Turn & Brake

Tail Lights

Ground

Backup Lights

Electric Brakes

Auxiliary Power
Green- Right Turn and Brake
Yellow- Left Turn and Brake
Brown- Tail Lights
White- Ground
Red- Reverse (Back Up) Lights
Blue- Electric Brakes
Purple- Auxiliary Power

It sounds like your green and yello wires are shorted together somewhere along the length of the harness. I would check the wires on the trailer first. Easier yet, if you have another trailer to connec or access to another to use for testing, connect to it and see if the problem repeats; if it does the trouble is in the vehicle's wiring.

Not finding what you are looking for?

101 views

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...