Posted on Oct 24, 2008

Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

1992 jeep engine problem

Hello Mikey,
Thank You for respond. It is very difficult to define from where sound come. Top or bottom. For shure, it is louder at right side of engine. The cranck and rod bearings are instaled new. Also, no problem with loosing oil presure. It is constant. I forgot to tell, the "diesel" sound it's lost over 2000 rpm. And also, intensity of "diesel" sound is the same for this 2 years.
Regards Bajdzo
I have a 95 Jeep Cherokee 6 Cylinder. Every since Saturday the truck has been having problems… it wont crank.The lights and on radio come on but it jus wont turn over. Friday night I drove the car parked it Saturday night came and tried to crank it but it wouldn’t start Sunday we got up and thought it needed a jump still nothing. A mechanic came looked at it and changed some round looking disk in the starter and the router belt still nothing (after checking fuses and other things) Monday he put in a new distributor cap and still nothing. Later Monday night we got home and just out of curiosity tried to crank the car and it started right up. Tuesday drove it to school and after school it again wouldn’t start back up. Please Help Me….

1 Answer

Anonymous

Master 674 Answers
Posted on Oct 26, 2008

Anonymous

Master

Joined: Aug 23, 2008

Answers

674

Questions

Helped

395140

Points

2113

Hello did you get your question answered?
how was the support
thanks
paul

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

0helpful

1answer

Shift patterrn

5 speed 1st top left 2nd bottom left 3rd top middle 4th bottom middle 5th top right reverse bottom right
4wd 2wd top 4high one click down neutral shift to right then push down 4low bottom lowest point

Read full answer

Mar 26, 2014 • 1992 Jeep Wrangler

0helpful

1answer

1992 jeep cherokee briarwood inline 6 4.0 4x4 need timing specs.

The ignition timing is non adjustable on your engine. Timing is totally controlled by the engine computer, responding to signals gathered from the engine sensors.

Read full answer

May 30, 2011 • Jeep Cherokee Cars & Trucks

0helpful

1answer

My jeep is making a really loud sound like an exhaust leak it's coming from the front end of the engine can anyone help

I would have the exhaust manifold inspected, a lot of times it cracks where the pipes connect. I am assuming you have a 4.0L. Then you would just need to change the manifold to fix the problem.
Thank you,
Lee

Read full answer

Feb 13, 2011 • 1992 Jeep Wrangler

0helpful

1answer

Timing belt how do you set it

Make Shure Your Distributor T it on position 1 and from your Cam shaft make shure the natch is Top Position with little Triagle..Then Make shure you belt it correcly positioning on the bottom Sproket ..Then position top belt then slowly adjust the belt
till is stay on all the sproket adjust level Turn Slowly Engine conplete turn... then Check Cylender 1 for top piston corresponding to Distributor.. The T as to be aligned to pin 1 According Piston 1 for Ignition Start innitial Order 1-6-3-5-2-4

Read full answer

Oct 07, 2010 • 1997 Ford Contour

2helpful

1answer

Gasoline smell from 1992 Jeep Cherokee 4.0 6 cylinder engine

Check Fuel pump seal at top of tank. Check carbon canister to see if it full of fuel and or carbon. You will have to disconnect the hoses to it and tip it upside down. Plugged evap hoses from tank to engine. Leaking fuel injector.

Read full answer

Sep 06, 2010 • 1992 Jeep Cherokee Sport

0helpful

1answer

Just need to know what the torque specs are for 3.0 toyota 1992

This is for the 3VZ-E SOHC 12V engine, 2959cc catalytic. Sure its the same engine as in the pickup.----------
Stage 1 - 34nm--------- stage 2 - tighten by 90 degrees-------- stage 3 - tighten by 90 degrees-------- -------
the sequence is, with flywheel on your right, looking down on the engine...
--top row of bolts on top bank - top Left to top right bolts 1,2,3,4----------------- bottom row of bolts, on top bank - bottom left to bottom right bolts 3,4,5,6.------------ Top row of bolts on Bottom bank bolts 1,2,3,4------------- bottom row of bolts on bottom bank bolts 5,6,7,8------------ sequence is (top bank) 7,2,6,3,5,4,1,8-------- --------(bottom bank) 2,7,3,6,4,5,8--------
Hopefully this comes out tidy on the other end.

Read full answer

Jan 16, 2010 • 1992 Toyota Pickup

0helpful

1answer

Located a chilton for 1998 jeep will it work for 1992 jeep cherokee. need to replace the alternator

Depends on which engine you have. If it is a 4.0L it should change out the same. This one must be removed from the bottom of the vehicle. Pay particular attention to the belt loosening technique in the maual which adjusts with the power steering pump.

Read full answer

Jul 10, 2009 • 1992 Jeep Cherokee Sport

2helpful

1answer

Hello, I have a 1995 Grand Cherokee with a problem which is that I turned off at any moment, does not show a defined pattern that can be associated only turns off, then switched on without any problems....

Sounds like the ECU /ECM connection.You will need to clean the connectors and add a very small amount of Dielectric grease

Read full answer

Jan 07, 2009 • 1995 Jeep Grand Cherokee

0helpful

1answer