SOURCE: 2002 CHEVY BLAZER
Can purchased an adapter kit at Best Buy or Circuit City that is color cordinated with the factory wires for about 12.00. This will go right into the factory plug.
Radio 12v orange + radio harness
Radio Ground black - radio harness
Radio Ignition dk. green + radio harness
Radio Illumination gray (dimmer) + radio harness
Factory Amp Turn-on N/A
Power Antenna N/A
LF Speaker +/- tan - gray +,- radio harness
RF Speaker +/- lt. green - dk. green +,- radio harness
LR Speaker +/- brown - yellow +,- radio harness
RR Speaker +/- dk. blue - lt. blue +,- radio harness
Immobilizer Bypass Module: Required: Yes Type: Passlock 2 Part #: 457G, 555L, or 555T
Notes: The Passlock 2 wire colors are yellow, orange/black, and red/white (not used).
SOURCE: the stereo wire colors for the 2001 chevy s 10
Radio 12v orange + radio harness Radio Ground black - radio harness Radio Ignition dk. green + radio harness Radio Illumination brown + radio harness Factory Amp Turn-on orange + radio harness Notes: The amplifier is behind the glove box. Power Antenna N/A LF Speaker +/- tan - gray +,- radio harness RF Speaker +/- lt. green - dk. green +,- radio harness LR Speaker +/- brown - yellow +,- radio harness RR Speaker +/- dk. blue - lt. blue +,- radio harness
SOURCE: I need a wiring diagram for a 1989 chevy silverado
When I replace a stereo, I buy the harness which is available on Ebay.com or places like Best Buy. All of the wires are labeled and color coded which makes it easier to connect with the wire nuts to any aftermarket stereo that fits in your dash.
1,717 views
Usually answered in minutes!
×