2007 Cadillac CTS 3.6L Logo

Related Topics:

Anonymous Posted on May 23, 2017

XM radio cuts out

Main problem: the XM radio cuts out (goes mute) during a song for a fraction of a second to 10 seconds. During this time the display is normal. AM/FM radio bands work fine. Other XM radio intermittent problems: station buttons don't work, it switches bands on its own XM to FM, sometimes the "FM Lock" message is on for a few seconds. Can XM radio do anything about the problem? If not, who trouble shoots problems like this and replaces XM modules, other than the Cadillac dealer?

4 Related Answers

Anonymous

  • 319 Answers
  • Posted on Jan 31, 2009

SOURCE: Radio wont work

wfdyer,

go buy a new radio. You can usually get free installation. If you are a do it yourselfer. Then go to crutchfields web site. They are great, they give you the adaptor plates and wire harness to go from what ever radio you get to the car, with no splicing (cutting and reconnecting of wires) They will tell you what radios will not work and tell you what ones will.

Sorry to say it but you have power to the radio, and there are really 3 things a radio needs to work. power, speakers, and a signal. you can check the antena to make sure its not broken or disconnected. but most of the times its the radio

tepfy

Ad

Anonymous

  • 1 Answer
  • Posted on Dec 31, 2009

SOURCE: Everytime I push the button for XM radio, It

Don't push the button.

Anonymous

  • 10865 Answers
  • Posted on Apr 07, 2010

SOURCE: Second time the radio had to be replaced

Hello. I have driven cadillacs for years. Although it is unlikely to get two lemon radioes in a row, it sounds like this is what happened. I would recommend that you speak kindly but firmly to the dealership manager and tell him that you want another new radio. Joe

caroldon

Donald DCruz

  • 17130 Answers
  • Posted on Sep 03, 2011

SOURCE: The radio in my cadillac

This can be a serious fault in the RF receiving stages as the signal processing being weak the AFT- auto frequency tuning- seems to HUNT around and also produce the squelch - mute activated with low signal.
This might need a signal test in the front end section and so you might help. But before you pull out the set a possible chance can also be a faulty ANTENNAE. If possible remove and check on the wores, connectors and the antennae. Try with another working one or try this in another set to confirm.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
2answers

My radio on dash says to calibrate . How do I calibrate the radio on 08 Pontiac g6

It takes scanner to do it. Not all scanners can do it. Call before going. Dealers can do it.
2helpful
1answer

How to work 12 disk changer in 2001 corvette with a bose radio

Hello my name is Ben. I have had 2 of these cars and they both worked the same. Once you load the cartridge with your CDs and insert the cartridge into changer and close that little door on the changer the rest is automatic. On the dash you will see two buttons to the left of the radio display. One says TAPE AUX. That is the button that switches from radio to the CD changer. Push the TAPE AUX button and the CD changer will play whichever CD is selected. The PREV button if pressed during the first 8 seconds of a song will go to the previous song, if PREV is pressed after 8 seconds it will go to the beginning of the song. The PROG button will go to the next CD. The NEXT button will go to the next song on the CD you are playing. The REV and FWD allow you to quickly move within a song, either forward or backward. If you have any other questions, just ask, I have the owners manual readily available. I know it should be in the car, LOL
11helpful
2answers

How do i set the clock in a 1992 buick century with stock radio

To set the clock, check this procedure:
1. With the radio ON or OFF, press SET. The SET indicatore will appear on the digitas display for five seconds.
2. You must begin to set the clock to the correct hour and minute during those five seconds. Press and hold SCAN until the correct hour appears on the display.
3. Press and hold SEEK until the correct minute appears on the display.

Hope help with this, remember rated this post, and TY for using Fixya.
0helpful
1answer

I have a Citroen Xsara 2.0 Diesel made in 2003. A minute or so after starting the car (with the radio on) the radio emits a loud beep followed by 10 seconds or so of silence, then works as normal. During...

If you're finding it difficult to service/repair your car, get one of those online manuals. You'll not have to wait for others to answer, or rely on mechanics and all. Plus I know a website that
has very good manuals online, without expiry i.e. for lifetime.
www.reliable-store.com
1helpful
1answer

Tire pressure reset will not reset

Labatche822,
The process for resetting your Tire Pressure Monitor (TPM) is below.
Good luck, let me know.
Regards.

To reset (calibrate) the system:
1. Turn the ignition switch to RUN.
2. Press the GAGE INFO button on the DIC until
TIRE PRESSURE appears on the display.
3. Press and hold the DIC RESET button for about five
seconds. After five seconds, the display will show
TIRE PRESSURE RESET. If TIRE PRESSURE
RESET does not appear on the display after about
five seconds, see your dealer for service. After you
release the DIC RESET button, TIRE PRESSURE
NORMAL will appear on the display.
The system completes the calibration process during
driving. During the first 10 to 25 miles (15 to 40 km) of
driving, the system will not alert you if a tire is high or
low. After 25 to 100 miles (40 to 160 km), the
system will only alert you about pressure differences of
12 psi (85 kPa) or more. After about 100 miles (160 km)
of driving, the system will alert you if one tire is
10 psi (69 kPa) different from the other three tires.
1helpful
1answer

1985.5 PORSCHE 944 digital clock (changing time)

There are three buttons, let's call them 1, 2, and 3, from left to right.


Clock
Time setting

A. 12 AM, PM or 24.00 h
With the clock in the time readout mode, keep
button (2) depressed for 4 seconds -12 AM, PM
or 24.00 flashing. After pushing button (1), either
a 12-hour (AM + PM) or a 24-hour setting
program can be selected. If you only want to
change the display mode, push button (3). The
clock then returns to its normal timekeeping
function.

B. Hours
Push button (2) a second time - hour display
flashes. Set hour by pushing button (1). After
pushing button (3)*, the clock returns to the time
readout mode with new hour setting.

C. Minutes
Push button (2) once more - minute display
flashes. Set minute by pushing button (1). Upon
pushing button (3)*, the clock is started -
accurate to within 1 second.

Stop watch function
The stop watch can only be set in motion if the
clock is in its normal timekeeping mode and not
during setting operations.
A. Push button (3) - 00:00 display appears;
B. Push button (1) - stop watch is on;
C. Push button (1) a second time - watch stops.
(Additional times can be added by pushing button
(1) again - stop watch keeps running. Push button
(1) once more to stop timing.)
D. Push button (2) - 00:00 display appears;
E. Push button (3) - normal timekeeping mode.

If button (3) is pushed during operation A and
B, the setting procedure must be restarted
(push button (2)). icon_biggrin.gif

0helpful
1answer

Radio wont work

wfdyer,

go buy a new radio. You can usually get free installation. If you are a do it yourselfer. Then go to crutchfields web site. They are great, they give you the adaptor plates and wire harness to go from what ever radio you get to the car, with no splicing (cutting and reconnecting of wires) They will tell you what radios will not work and tell you what ones will.

Sorry to say it but you have power to the radio, and there are really 3 things a radio needs to work. power, speakers, and a signal. you can check the antena to make sure its not broken or disconnected. but most of the times its the radio

tepfy
0helpful
1answer

XM radio goes in and out

Call the XM service number, they will refresh your signals. If it was the head unit, the same problem would occur during AM/FM signal transmission
Not finding what you are looking for?

109 views

Ask a Question

Usually answered in minutes!

Top Cadillac Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...