How to replace a fuel line on a 1991 Jeep wrangler

SOURCE: how to replace a jeep tj fuel tank?

I would be really careful with doing this repair as this is very dangerous. You need to relieve the fuel pressure by pulling the fuel pump fuse and starting the truck. Drain the tank with a siphon pump. Remove any exhaust or other parts that are in the way, loosen the straps and support the tank with a floor jack and a block of wood. There are several hoses, and a few wire connectors to disconnect and you may want to replace those hoses while you're down there. Once you put the new tank in, reconnect the electrical and hoses, raise the tank and strap it back up. Put anything else back together you took off the truck.
Personally, I would take this in to get fixed as this is dangerous work (I did mention that). I you do this anyway, use your head and buy a proper container to hold the gas in , as well as jackstands and a class "B" fire extinguisher. Disconnect the battery and don't smoke or use a drop light under the car, and I will not accept responsibility for this.

SOURCE: my 91 jeep won't start...

The Starter relay is bad.

SOURCE: 1991 jeep wrangler: alternator overcharging

It sounds as the voltage regulator which is built into the back of the alternator has stuck. Occaisionally this even happens on new ones. Would suggest taking the alternator back as it shoud be under warranty.

SOURCE: 1991 jeep wrangler clutch

Is there a very short term solution? I just want to get the jeep from my Dad's house home and I don't want to have it towed. Once i have it at my place I can do the more extensive work.

Thanks

SOURCE: 1991 Jeep Fuel Control Issue

Hey Mudkicker,

Who ever thought of putting an electric fuel pump inside a tank of gas........

Check your other gauges for accuracy. They do that when a ground is loose.

Check the wiring from the fuel tank along the longitudinal frame for frays and shorts. Plugs are secured.

Under the hood, passenger side, check the fuel pump relay. Switch it with one of the others to test it.

Bring the vehicle to an auto parts store. Ask them to break out he code reader. Check for diag codes

Comment me back
Mike.