SOURCE: BROKEN HOOD RELEASE CABLE.NEED TO
One of the 2 cables on my hood release is loose. One works fine and releases (dirver's side) but the other is loose and does not. I cannot get my hood up. I have a 1998 Jaguar XJ8
Thank you ....
SOURCE: hood release cable is broken
Is there any part of the cable inside the cabin that you can pull with a pair of pliers? I suggest that you try that. You may need to disassemble it from the pull handle to make that work.
SOURCE: Hood won't open. Cable is broken and can't get hood to pop.
NO there is no manual way . get a good flash light and look at teh latch through the grill or from under the truck and try and pop it with a long flat blade screw driver
SOURCE: hood release will not release hood cable is not broken
the outer cable may have come loose near the lock, if the grille screws are accessable remove the grille and you will have access to the underside of the lock, you may need a screwdriver to push the lock lever aside to unlock the bonnet
SOURCE: Broken tab to hood release cable
Get a long screwdriver and try to release the secondary latch that way. Or if you have small hands reach up under the hood and pull the secondary latch toward the left.
433 views
Usually answered in minutes!
×