2007 Chrysler Pacifica FWD New Cars Logo

Related Topics:

A
Anonymous Posted on Feb 02, 2012

07 chrysler pacifica po732 transmission code - 2007 Chrysler Pacifica FWD New Cars

5 Related Answers

Hector L. Morales

  • 649 Answers
  • Posted on Dec 01, 2009

SOURCE: PO740 error what is it and how do I fix

These are trasmission codes my advise would be to take it to a shope for further diagnosis.

Testimonial: "Thanks, I have more information now than before. It has to do with the computer going bad. The insulation material was brown in the trans computer."

Ad

Anonymous

  • 109 Answers
  • Posted on Feb 22, 2010

SOURCE: my check engine light came on and i pulled the

P0732 trans code, if this is a stand alone code, access someone with a chrysler scanner and monitor the trans speed sensors, preferbably the input one, make sure there is a rpm readings on both when you drive the vehicle, if ok, do a 2nd gear clutch test, if failed, internal clutch failure, if ok, replace the trans soleniod pack, it has internal failure, easy to change on this model with the 41TE trans only, if 62TE, take it to a Chrysler dealer.
GOOD LUCK, RDJRP

Anonymous

  • 7353 Answers
  • Posted on Mar 12, 2010

SOURCE: where do i put transmission fluid in on a 2004 chrysler pacifica?

The dipstick tube is 6 inches away from the battery, yellow handle.

alicantecoli

Colin Stickland

  • 22516 Answers
  • Posted on Mar 25, 2010

SOURCE: Where is the transmission fluid drain plug?

it doesnt have one

emissionwiz

Marvin

  • 85242 Answers
  • Posted on May 24, 2010

SOURCE: how to flush transmission fluid?

this service requires special equipment, all u can do at home is pull the pan and change the contents of the pan which is about 1/4 of the volume of fluid in the transmission

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

I have a 2006 Pacifica touring and the following error codes: po700, po562, po736; po732, po731 and po,720 and po480. Can you tell me what I need to fix this?

With that many codes and those specific codes I would suggest finding a reputable transmission shop. I suspect either a wiring issue or a bad trtransmission control module. A good shop should be able to determine which in just a couple hours or so.
1helpful
1answer

My 07 Pacifica will start but won't move out of park. Just clicks. Was told it may be the neutral safety switch?

No it's not the park neutral safety switch . It's the shift interlock system or what ever Chrysler calls it . It's a safety feature that won't let the transmission shift into gear unless you have your foot on the brake pedal .
What just clicks - explain ?
0helpful
1answer

07 chrysler pacifica cutting off going down the road for no reasom

check to see if the ground on the left side of the transmission is coming loose (not the eyelet but the wire itself) through the wheel well
0helpful
1answer
0helpful
1answer

What is code P0700 Pdone 2004 pacifica

Transmission malfunction. Not something to mess around with. Delaying having it checked could cost big money later. personally, I'd take to dealer, but if you have a transmission shop you trust, your choice. Remember, a diagnosis is only an estimate, you don't have to have it repaired there if not comfortable.
0helpful
3answers

My check engine light came on and i pulled the code po732. what does it mean?i have a 2007 chrysler pacifica awd. I'm lost can't find a manual

Most part places will have manual's.

Code - P0732 - Gear 2 incorrect ratio.
Transmission problem. Could be a sensor, I would reset computer see if it come's back, if it does have it check out could cause major damage if not taken care of.
0helpful
1answer

Chrysler 07 Pacifica. Fails to start

Visit the on-line store, known as reliable-store, they have the repair manuals. I'm sure you will get the solution of your problem.
Best Manuals
11helpful
3answers

2005 pacifica p0700 touble code problem

The P0700 refers to a Transmission Control System Malfunction. It's a generic code in that it's a warning to have your transmission computer scanned to get the precise codes in order to diagnose the problem further. Apparently, transmission issues are common in all Chrysler products in the mid 2000's . Have the car scanned for a more specific code and post back your results for further instruction.
Not finding what you are looking for?

148 views

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...