Serpentine belt diagram or route 2006 dodge stratus

SOURCE: I just need a routing diagram for the serpentine

Below are 2 diagrams, 1 with AC, 1 without for serpentine belt routing:

SOURCE: routing serpentine belt 2006 dodge

going clockwise starting on the passenger side of truck
1 over the alternator pulley
2 under the water pump pulley
3 over the idler pulley
4 over the power steering pulley
5 over radiator fan pulley
6 over crankshaft pulley
7 automatic tensioner
8 over a/c if equiped

SOURCE: diagram for serpentine belt routing dodge caravan

Click on the following free direct Link. It has the Serpentine Belt Diagram for your 2002 Dodge Caravan 3.3L.

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.Com!

http://www.2carpros.com/car_repair_information/year/2002/make/dodge/model/caravan/2002_dodge_caravan_drive_belt_routing_diagram.htm

SOURCE: Serpentine belt routing diagram 2005 dodge 2500

http://i167.photobucket.com/albums/u144/TxRattPack/Truck%20Stuff/2005DodgeRam3500-CumminsSerpentineB.jpg

SOURCE: Need serpentine belt routing diagram for 1994 Dodge grand caravan

3.3L?
Looking at the engine from front (right side of the Van): Stating at the Top, Going Left to Right and Clockwise:
Over the Alternator
To under the Idle Pulley,
To Over the AC Compressor.
To the Left Side of the Water Pump.
To the Right side and Under the Crankshaft Pulley
To the Right side and Over and Down the Tensioner
To Under the Power Steering Pump
And Back up-to the Left side of the Alternator.
Advise when puting it on:
Put the Belt around everything else accept for the Alternator. After it is around all the rest of the Pulleys - Pull the belt up - tight from the Power steering Pump and the Idle Pulley to form a loop, holding the Belt close to the Altenator Pulley.
Using the 15mm wrench or belt tensioner bar - rotate the Tensioner Pulley towards the front of the Van and then place the belt over the Alternator.
Let me know if this helped or if you have additional information or questions. Feel free to contact me at FixYa.com!