1. Remove negative battery cable
2. Relieve fuel pressure (See Fuel Pressure Relief below)
3. Remove fuel filler neck
4. Disconnect fuel lines and electrical connection at fuel tank unit
5. Remove bolts from fuel tank mounting straps and lower fuel tank
6. Remove fuel level sending unit and fuel pump retaining bolts or cam lock ring
7. Remove fuel pump and sending unit from fuel tank
8. Pull fuel pump upward while pulling away from bottom support (be carefull not to damage the rubber insulator unless your fuel pump kit comes with a new one.)
9. Disconnect wire connectors from fuel pump.
10. Reverse procedure to install.
969 views
Usually answered in minutes!
×