- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
check oil level low or no oil causes no start so does --your oil sender may have failed --oil sender also has a screen filter which causes low or no pressure =oil pump problem ==the truck wont start or may start and shut off immediately
sounds to me like your starter isn't shimmed correctly common problem for the 5.0l and 5.7l. your starter isn't meshing with your fly wheel correctly and causing unnecessary strain cause the problems you stated.
ok make sure you have good fuel pressure
you must have good spark must fire a spark tester
if all that is good then check compression
and don't use STARTER FLUID on a GAS ENGINE it can blow a hole through the piston
hope this helps
I HAD THE SAME PROBLEM WITH MY 1999 GMC YUKON WITH THE 5.7 ENGINE HAVING TO JUMP START ALL THE TIME TO GET IT RUNNING, THE PROBLEM WITH MINE WAS THE FUEL PUMP HAD TO BE REPLACED, EVEN WHEN I REMOVED THE PUMP AND TURNED THE KEY FUEL PUMPED OUT BUT WAS NOT ENOUGH PRESSURE TO GET AND KEEP THE ENGINE RUNNING.I ALSO TRIED STARTER FLUID, THE ENGINE WOULD RUN UNTIL THE FLUID BURNED OFF.SO THE SOLUTION FOR MY TRUCK WAS THE FUEL PUMP AND NOW ITS STARTING LIKE A CHAMP
My 97 yukon did the same thing (I believe). The valve body in the transmisson wears out (design problem) and causes the transmission to shift really hard. My repair was about $500 (nondealer).
LOVE MY YUKON!
×