Question about 2007 Lexus IS 250

2 Answers

How to turn off maintenance req'd warning lights on dash

Cannot find anything in the manual on how to troubleshoot the maintenance warning light or how to turn if off. Any suggestions?

Thanks!

Posted by on

  • bmcdonough Oct 15, 2008

    It is actually the Check System light (with yellow exclamation and red exclamation). I do have an owner's manual, but I cannot find a fix.

  • Marvin
    Marvin May 11, 2010

    This information is in the owners manual, do you have one?

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Lexus Master
  • 364 Answers

This light How to turn off maintenance req'd warning lights o - 7407fc2.jpg correct? to troubleshoot this light, the car can be scanned with any OBD2 scanner/code reader. after it has been scanned, the scanner will have an option to erase all codes. once they have been erased the light will go off.

the only other way to make the light go off is to disconnect the battery for 15-30min. this will reset the engine ECU, causing the light to go off but also will erase any codes that may be stored in the EC
U. if the ecu resets and car is started and detects the same problem the light will come back on.

Check to make sure that the fuel tank cap is on tight.
When the fuel tank cap is loose:
The electronic engine control system warning light comes on as a temporary malfunction.

Posted on Oct 15, 2008

  • alex metro
    alex metro Oct 15, 2008

    Turn the vehicle off.

    1 - Press & Hold the ODO trip reset button on the instrument cluster.

    2 - Turn on the ignition on without starting the motor.(Push IGN switch without pressing the brake.)

    3 - Continue to hold the trip reset button until the ODO shows "000000" The light will now be reset for another 5k.

×

Ad
  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

An easy fix... but its not in the owners manule... turn the ingition on engine of. hold the trip button down and turn the ingition back on... this will do a count down on your clocks. but keep your finger on the trip button on till the count down is complete.

Posted on Oct 19, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Relearn tire position


You need a computer mechanic to hook up his computer and test the sensors. You may have a bad sensor in one of your tires

Jun 09, 2013 | GMC Sierra Cars & Trucks

2 Answers

How do I reset and turn off the "Maintenance Required" warning message on my 2006 Lexus LS 430 with built in navigation and radar cruise control? Many thanks.


normally disconnecting the battery for about ten minutes then reconnecting is enough to reset the computer and get the light to go out. although is there is a existing problem i will come back on after about 10 minutes of driving.

Apr 09, 2011 | 2006 Lexus Ls 430

1 Answer

How do I turn the Maintenance warning light on my 2020 Nissan Murano? I tried the manual indications to no avail. Thanks in advance. Leo


1. Turn your ignition switch on.
2. Press the Trip Computer switch until "Maintenance" is displayed. The trip computer button is located above the "Trip Reset" button and has a square graphic printed on it.
3. Press the "Select" button to enter the "Maintenance" menu. The "Select" button is above the "Trip Reset" button and has a circle graphic on it.
4. Press and hold the "Trip Reset" button for about 10 seconds until the maintenance reminder resets.


  • Apr 03, 2011 | 2009 Nissan Murano

    1 Answer

    How to reset "maintenance required" warning light


    To reset the maint light turn the key to postion 1 then push the trip button in and hold then turn key to postion 2 while still holding the button continue to hold the button light will flash and go out turn key off then start engine to see if it reset, note make sure the display is showing the mileage not the trip. good luck.

    Jan 25, 2011 | 2007 Lexus GX

    1 Answer

    My child away at college, has a Rav4, 2008 with a warning light on that looks like "tire tread?" Just had the oil changed 2 weeks ago, so shouldn't have anything to do with that. Sound familiar?...


    That symbol (tire tread) could mean a low tire pressure. The majority of vehicles today have the low tire pressure warning system, which indicates that one or more of the tires are below the minimum tire pressure. Have the tire pressure checked in each tire. As for turning the warning light off, some vehicles the light will go out after tires are inflated properly. Have them check the owner's manual for resetting warning light. Please inform me as to whether or not it was the tires...thanks.

    Nov 14, 2010 | 2008 Toyota RAV4

    1 Answer

    I have a 2009 2.5sl Nissan Altima. Can I manually reset the master warning light on the light.I just changed the oil that is the reason that it came on.


    To reset "Maintenance Notice" on the display, turn the ignition key to ON, with engine off. Select the "Maintenance Schedule' key by using the button to right or left. Using the button select the "Reset" key and push the "Enter" button

    May 27, 2010 | 2008 Nissan Altima

    1 Answer

    How to reset maintenance required warning light


    put the odometer on trip a turn the ignition off then hold in the trip button while turning the ignition to the on position then you will see 5 ----- count to zero thats all there is to it if this doesnt work read the owners manual

    Mar 01, 2010 | 2008 Toyota Sienna

    1 Answer

    How to disable seatbelt alarm on 2003 F-150?


    There is a procedure in the owners manual on page 110.

    BeltMinder activation and deactivation procedure
    1. Turn the ignition switch to the RUN (or ON) position. (DO NOT START THE ENGINE.)
    2. Wait until the safety belt warning light turns off. (Approximately 1–2 minutes.)
    • Steps 3–5 must be completed within 60 seconds or the procedure will have to be repeated.
    3. Buckle then unbuckle the safety belt three times, ending with the safety belt unbuckled. This can be done before or during BeltMinder warning activation.
    4. Turn on the parklamps/headlamps, turn off the parklamps/headlamps.
    5. Buckle then unbuckle the safety belt three times, ending with the safety belt unbuckled
    • After step 5 the safety belt warning light will be turned on for three seconds.
    6. Within seven seconds of the safety belt warning light turning off, buckle then unbuckle the safety belt.
    • This will disable BeltMinder if it is currently enabled, or enable BeltMinder if it is currently disabled.
    7. Confirmation of disabling BeltMinder is provided by the safety belt warning light flashing four times per second for three seconds.
    8. Confirmation of enabling BeltMinder is provided by:
    • The safety belt warning light flashing four times per second for three seconds.
    • Followed by three seconds with the safety belt warning light off.
    • Once again, the safety belt warning light will flash four times per second for three seconds.
    9. After receiving confirmation, the deactivation/activation procedure is complete.

    If you did not get an owners manual with your truck ( purchased used ), you can download one from Ford :
    https://www.fleet.ford.com/maintenance/owners_manuals/default.asp

    Dec 20, 2009 | 2003 Ford F150 Regular Cab

    1 Answer

    I purchased a 2006 Toyota Corolla this past June, and I love it. A light came on this morning, and I don't know what it's a picture of. It's on the far left, and it's not the maintenance light. I'm...


    I suggest review your 2006 Toyota Corolla Owners Manual (page 5) for details about cluster and warning lights. You have the CE/LE, S, XRS models for the light location.

    I am assuming that is the light of "service" only 450 for reaching the limit, and is one advise.

    I really hope helped with this; remember rated this help. Good luck.

    Nov 12, 2009 | 2006 Toyota Corolla

    1 Answer

    The light on the dash (warning lamp) shows the hood (bonnet)


    look under bonnet as it could be a mercury switch,or on or in the fastening device

    Nov 11, 2008 | 2006 Volkswagen Passat

    Not finding what you are looking for?
    2007 Lexus IS 250 Logo

    3,054 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Lexus Experts

    Marvin
    Marvin

    Level 3 Expert

    85178 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22484 Answers

    Jonah Oneal

    Level 3 Expert

    14092 Answers

    Are you a Lexus Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...