Have 1994 toyota 4x4 pickup with a 22re, that i bought with blown head gasket. Guy took it apart and removed all wires and connectors. injector plug ins are 3 blue with one black, and different color wires need to know which ones go to which injector. Wiring diagram?
Keith
The color of the plastic plug does not matter... You will have two injector plugs with white/red and yellow wires - those two go to cyl#'s 1 and 3.
the other two plugs will have white and blur wires.. those two plugs go to injectors # 2 and 4.
I have a 94 toyota 4x4 with the 22re. When driving down the road with the lights on and the windshield wipers on, if i turn the high beams on the truck jerks. Also if ive got the windshield wipers on the voltage gauge moves left to right. When ive got the lights on and i press the brake it bogs while im sitting still just idling. Wat could be causing these problems?
From all the toys i have worked on the plugs will fit into the hole they came out of
My engin not start.
SOURCE: got toyota van 84 need
HERE is a diagram of alternator wiring at alternator do you also need where wires go?
SOURCE: 1994 Toyota Pick up 4X4, fuel pump only works when starter is run
The information you are requesting is copy writted in order to get it leaglly go to alldatadiy.com and buy a subscription to your car and you can view all the informantion you want. and the diagram shows all the information you need includeing a powertrain harness and look up by system not in a book.
SOURCE: 87 toyota pickup 4x4 22ret i have no injector
OK, the computer grounds one of the curciuts on each injector to pulse it.
Interesting information from alldata, the autodata and mitchell and Bosch AFC all show a code 11 as being ECM (B+) that I have, which could be the EFI main relay, fuse, fuse link or wiring (usually one of the wires on the battery terminal have broken off or corroded and lost connection)
Here is the diagram I have for Bosch AFC on Toyota PU, I'm not sue it will be readable compressed for upload but here you are
11,013 views
Usually answered in minutes!
Question: The injector wires are blue & black? 1994 22 RE injector wiring colours should be Black/Red for power on all 4; White/Red for injectors 1 & 3 and solid white on 2 & 4 for ground.
Shoot me your e-mail address, I will send you the wiring diagramme, I have it in .pdf, & the FixYa is not set up to upload .pdfs
[email protected]
I just took my motor apart need a wiring diagram to make sure it's wired right!
Were is oil light sensor on a 1991 toyota pickup 22re engine
toyota surf 1994
what color are the wires activating the fuel level guage?
×