Honda accord service b14

If a b14 code pops up on your Accord, you can fix it as follows:
1. Replace engine oil and filter
2. Check the tire pressure and rotate the tires
3. Check drive belt, install a new air cleaner element, and replace the dust and pollen filter
4. Replace the transmission fluid if required
5. Replace timing belt and spark plug if need be
6. Change the engine coolant
7. Also, replace the back differential fluid
Note: if the problem gets resolved at step 1, you don't need to move forward with the rest of the steps.

Time for a service. Here is a copy of the manual: http://techinfo.honda.com/rjanisis/pubs/OM/A51111/A51111OM.pdf

Pgs 55, 61

you can determine the codes from here: http://www.curryhondaga.com/honda-maintenance-minder-service-atlanta-ga.htm

The B postcode area, also known as the Birmingham postcode area,[2] provides postcodes for the boroughs of Birmingham, Solihull, Sandwell and Walsall and parts of Warwickshire, Worcestershire and Staffordshire in England.

The B14 on your Honda Civic 2006 can be fixed by following these steps:
1. Replace engine oil or if need be, replace engine oil as well as the oil filter
2. Rotate the tires and check that they have the recommended pressure
3. Replace the air cleaner element, and the dust and pollen filter, also inspect if the drive belt is in perfect condition
4. Replace the transmission fluid
5. Replace the timeing belt if damaged and the spark plugs, also adjust the valves and inspect the water pump
6. Replace the coolant
7. Replace the differential fluid
Ideally, you should check the error status after each step, and stop when it goes away. However, you should ensure that all parts and fluids are as per requirement.

Letter B is most likely for Body Codes

Not a generic code

Need to check with a repair shop that
has ALDATA,Mitchell, or similar Data Base,
or have a scanner put on it,it will bring it up

A Scan Tool is not a code reader, you hear about
at the parts store

Maintenance Codes:

A - Replace just engine oil
B - Replace engine oil & filter

1. Rotate tires & check air pressure
2. Replace air cleaner element, check drive belt and replace dust & pollen filter
3. Replace Transmission fluid & transfer fluid (if equipped)
4. Replace spark plugs, timing belt, inspect water pump, valve adjustment
5. Replace engine coolant
6. Replace rear differential fluid

If you have a B14, it's B, 1, 4 as in the list

HONDA do not make radios .They only affix their badge onto
radios made by the large manufacturers (ALPINE , BLAUPUNKT etc).

First try https://radio-navicode.honda.com/
If so , then if the above suggestion is not successful ,then unfortunately the code will not be available for free (or cheap ) from anywhere on the Internet.

Main Dealer or a Decoding Service only

Normal 0 false false false MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;} try https://radio-navicode.honda.com/



if the above suggestion is not successful ,then unfortunately the code will not be available for free (or cheap ) from anywhere on the Internet.

Main Dealer or a Decoding Service only

UnfortunatelyHONDA codes are only available from the Main Dealer or by using a Radio Decoding Service who will connect a laptop to read the working code inside your radio`s memory chip (EEPROM)

If your talking about the VIN, call your local honda dealer(service dept.)