Question about 1990 Mercedes-Benz E-Class
My 1990 mercedes benz power windows work like every other day. i was told to change the relay, but i do not know where it is
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Common causes for High-pitched noise from rear wheels are:
The wheel bearing: this is not usually dangerous in the short term, but I recommend contacting a mechanic and having it fixed. To test the wheel bearing, you lock front wheels, and jack up the car rear and spin the wheel (handbrake unlocked). If bearing is worn you hear a drone. When is the bearing, often car starts vibration above 40 mph.
Noise from bearing can be continuous, intermittent, only when steering, only when hot.
The brake pads: when brake pads are worn out they start making a squealing noise, in this case the noise is only when you brake or continuous. When you jack up the car the wheel may be a little stiff, but not necessarily.When brake pads are completely gone you also hear a scratching noise when braking. Inspect your brakes immediately.
Other suspension problems: Jack up the car as suggested above, check if the wheel has a slight play on the sides. Check all of the suspension components, suspension mounting points, and steering linkage for damage. Also, check the frame rail for wrinkles. It is very important that these components be in good condition, if you notice any problem here, go immediately to a mechanic.
Try doing the simple test above, reinstalling the wheel and working the tire back and forth. This is a common test for bad ball joints and wheel bearings.
Posted on Jul 17, 2008
Hello, To the rear of the wood grain where the switches are, you should have a small piece of carpet that you just pull up and get it out of the way. You should see 1 screw. Remove the screw and gently pull up on the back of the wood grain. Now you will be able to change the switch.
I hope this helps.
Posted on Feb 07, 2009
The fuel filter is located on the right rear underside of the car, just ahead of the rear axel area. You need to remove the cover to find it. It is the large canister next to the electric fuel pump.
Posted on Jun 18, 2009
300e tranny reverese uses clutch disk for B3 and therefore no external fix. You will need to pull the tranny out and might as well rebuild the whole thing.
Posted on Jul 15, 2009
Tips for a great answer:
Jun 26, 2012 | 1990 Mercedes-Benz E-Class
Dec 29, 2011 | 1990 Mercedes-Benz E-Class
Oct 28, 2011 | 1989 Mercedes-Benz 300-Class
Apr 03, 2011 | 1990 Mercedes-Benz E-Class
Aug 04, 2010 | 1992 Mercedes-Benz Mercedes Benz 300 Class
Mar 25, 2010 | 1993 Mercedes-Benz E-Class
Aug 27, 2009 | 1990 Mercedes-Benz 300 Diesel
Apr 16, 2009 | 1987 Mercedes-Benz 300-Class
451 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: