Two new abs sensors fitted on my two drive car and the abs light is still on? can i reset the light?
SOURCE: fit new indicator stalk to VW passat esp , abs light on now
the stalk should have no interference with the abs or esp set up what i would look at doing is checking your abs sensors they can go all of a flash...goodluck
SOURCE: bmw 520i 1999 abs/asc lights on diagnostic
Check to see if your brake pads and rotors are in good condition. Or if you have replaced the pads yourself and have not reset the wheel sensors this would cause the ABS Antilock Brake System light and the ASC Automatic Stability Control light to stay on as the ASC uses the ABS brakes with computer assistance to control the car
SOURCE: Engine management light on rac scan shows fault
dear friend-fitting the sensor should have cleared the fault code,but maybe there is another one hiding somewhere.remove the battery termenal and leave for 30 minutes re-connect and check again,if no joy take to dealership to reset.
SOURCE: reset the wheel sensors on BMW e46
If you took this in and had BMW do the work to fix it and it is not fixed why do you not return to BMW and get it fixed, If you have paid for a repair and the repair did not solve the problem have them refund your money.
SOURCE: fitted new abs wheel sensor how do you turn off, 850 volvo
Most times, warning lights, engine lights ect, can be reset by disconnecting the battery for 5 minutes or so, but you will also loose any saved radio stations, times, and anything else like that.
555 views
Usually answered in minutes!
×