At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
you can purchase an haynes manual at any parts house it shows you detailed how to. maybe this info will help you out ..you can purchase an haynes manual at any parts house it shows you detailed how to. maybe this info will help you out ..
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
It's more likely a fuse is blown, the tail lights are on the same fuse as the dash illumination, check the tail lights if they are not working replace the fuse marked 'tail' in the fuse panel on the inside at the left side of the dash under the cover. At the same time check the 'gauge' fuse', there is a fuse location diagram on the cover.
Make sure coolant level is good and no leaks. Check that belts are there and tight( when you push down on belts with finger it should only move about half to one inch). Also check temp. with hand held thermometer at ends of rad. hoses at the motor. Temp reading should concur with car gauge ( if not gauge maybe faulty) If all is good consider thermostat replacement ASAP
mikenash
is thier a manual that showes where the heat sensor is located at
[email protected]
body and engine wiring
×