At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You could check the two yers against their part numbers on rock-auto (below)...
If the part numbers are the same the procedures are as well...
(they are the same).
Hope this helped.
Go to any Napa, Autozone,or web info for diagram, as for step by step, here goes. lift right side of van and remove tire and splash shield, drain antifreeze, you need a floor jack to move the front of engine up and down during the process, remove right mount, engine plate, belts, tensioner, pulleys, remove engine timing covers, and expose the timing belt, set the timing to marks as indicated by diagram, remove belt, and remove the pump, while your in there,good idea to cange cams and crank seals. and timing belt. GOD LUCK. RDJRP.
To align both sets of timing marks, turn engine crankshaft to the right with belt on cam and crank. Once you have done this the crankshaft alignment mark (on front of crankshaft gear) will line up with mark to the rear of gear on engine block.The two cam gear timing marks should be alines across from one another. The right cam gear is the intake side and the left side is the exhaust side. After removing the belt turn the exhaust cam down 1/2 notch. Timing mark on exhaust 1/2 notch down from the intake side. Install new belt and recheck everything to make sure it's all correct. Hope this will help you.
Sorry for the severe delay. I am personally going back to answer your unanswered question. I do not know if you still need the answer, but I am going to answer it in case you still do.
Click on the following direct Link. It has the Timing Belt Diagrams with Marks for the Camshaft and Crankshaft that you will need. It also has numerous other helpful diagrams for use.
Again my apologies... Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!
The 3.0 liter is a Mitsubishi design and is not a free wheeling engine or a non interference design, this does not mean the valves are bent, install the belt and then check for bent valves.
there is a point and there is an arrow,,,,, what is the mark
i want to know how to set a timing chain for a dodge caravan 2005 3.3l
timing chain
replaced tensioner and now have to time the engine
×