FRONT OR REAR GOT HIT?
it is not a FORD nor MAZDA CAR
CHEV CAMARO
WHY YOU FAILED TO DO IS SCAN THE PCM/ SRS SYSTEMS
AIR BAG LAMP ON, (DASH)SRS?
THE SERVICE MANUAL COVERS ALL THIS.
IF THE SRS TRIPPED THE PCM SEE THAT CAN CUTS FUEL.
SO THERE IS NO FUEL FIRE AFTER ANY CRASH.
https://eautorepair.net/Marketing/Default.asp
TO SHIFT OUT OF PARK THE TAIL BRAKE LAMPS MUST WORK
AND FUSE F33UA ,UNDER HOOD BLOWN.
BCM CAN BLOCK THE SHIFT LOCKOUT SOLENOIDS\
THE BCM SEES BRAKES DEAD.?(TAIL LAMPS)
The driver must press the brake pedal before moving the park lever out of the PARK position
CHECK ALL FUSES ,SKIP NON, NO TOOLS NEEDED A FREE TEST DIY.
THEN
SCAN IT. Obd2 AND SRS BOTH;.
MY GUESS SOME OF THE PROBLEMS IS JUST BLOWN FUSES
BUT NOT ALL
OTHERS POSTED MANY TIMES THIS.
If you are replacing the air bags, you should replace the front left and right crash sensors, the spiral cable under the steering wheel, AND the center air bag sensor, which is in front of the console. If your car has seat-belt pretensioners and force limiters, you may have to replace them also. You will know this if the seat belts are " STUCK locked up". If you do not replace all of the parts, you may get a air-bag code, and the air bags may not deploy next time.
AND
You triggered the impact sensor.(usually on or near the front bumper) It will need to be re-set or replaced, and obviously, you need to replace airbag.
CAR 2012 HAS SIDE IMPACT SENSORS TOO;.
6 AIR BAGS IT HAS. AND BELT SENSORS TOO THAT CAN TRIP
AND 4 impact sensors
NOT SCANNING FIRST (AFTER FUSES) IS THE PROBLEM HERE
JUST SCAN THE SRS SYSTEM. IS THE SIMPLE ANSWER
SEE THESE (SOME) HUGE DTC ERRORS POSSIBLE, SCAN IT.
DTC B0012 or B0013
DTC B0014, B0021, B0031, or B0038
DTC B0015, B001A, B001B, or B0022
DTC B0016, B0018, B0023, or B0025
DTC B0019 or B0020
DTC B0052
DTC B0074
DTC B0079 or B0080
DTC B0081 (Passenger Presence Module)
DTC B0081 (SDM)
DTC B0083-B0088
DTC B1001
DTC B1019
I turn the key on all lights in dash came on but wont start chek all fuses all OK battery is good try to star on neutral docent work
I know this is an old post but if you get this message I'd greatly appreciate if you let me know what was the problem, I have the same exact case.
×