On 99 Cherokee Spor... there are 3 screws at the bottom to remove. Once removed, slide the bottom out to get past the stop tabs.
Hope this helps; also keep in mind that your feedback is important and I'll appreciate
your time and consideration if you leave some testimonial comment about
this answer.
Thank you for using Fixya, and have a nice day.
SOURCE: Mechanic called me telling me I need to bring him
Bring the resistor &/or the pigtail (socket plug) to any reputable auto parts store & they should be able to match up a replacement pigtail.
SOURCE: 1999 olds cutlass glove box removal
you need to remove all the screws on the bottom of the glove box on the outside, then on the inside remove all the screws too. and then pull it out. sometimes some glove boxes have stoppers on the edge of the door inside and you have to pry on them to pull the stoppers in front of the side of the glove box so you can remove it entirely from the dash.
SOURCE: How do you remove the glove box on a 2005 Jeep
I forget when they changed body styles, but if your is still a WJ body, you pull the glove box out halfway, the reach under the dash lip, there are a couple of rubber bits that you hold back and the box will pivot the rest of the way out.
SOURCE: The glove box door opener
Try car dismantlers or scrapyard. Get the whole glove box door and it wil cost you much less then new one.
2,908 views
Usually answered in minutes!
On 99 Cherokee Spor... there are 3 screws at the bottom to remove. Once removed, slide the bottom out to get past the stop tabs.Hope this helps; also keep in mind that your feedback is important and I'll appreciate
your time and consideration if you leave some testimonial comment about
this answer.Thank you for using Fixya, and have a nice day.
×