How to replace an ignition switch - Cars & Trucks

How to Reprogram the Ignition Key for an Oldsmobile Aurora

www.ehow.com > Cars

How to Reprogram the Ignition Key for an Oldsmobile Aurora. The Aurora is ...Replace the ignition switch in a 2002 Oldsmobile Alero after a thorough trouble-shooting session to eliminate issues with voltage, shorts, faulty grounds... How to ...

How to replace an ignition switch in a Oldsmobile Alero ...

? 14:05
https://www.youtube.com/watch?v=5FKwU467PKU
Mar 10, 2012 - Uploaded by BuckeyeBryan
How to replace an ignition switch in a Oldsmobile Alero. ... Showmore ... How to diagnose a bad starter, ignition, neutral safety switch!

GM How to Replace Ignition Lock Cylinder - YouTube

To troubleshoot these issue, for ignition switch replacing procedure:---
Click the link below:---

IGNITION SWITCH REPLACING

It depends on vehicle to vehicle. But it's not very difficult on mot of cars to replace ignition switch. Basic theory of replacing ignition switch is same for all car models. -----

To replace ignition switch on your vehicle, I suggest you few helplinks with proper ignition switch replacing procedure. View its details and you can replace ignition switch on your vehicle.

-------------

Click the link below: ------

----------

How to remove ignition switch on VW Car models?

http://schematicsdiagram.blogspot.com/2011/12/how-to-remove-ignition-switch-on-vw-car.html

-------------

How to replace Ignition Lock Cylinder on Acura Car Models?

http://repairhelpcenter.blogspot.com/2011/11/how-to-replace-ignition-lock-cylinder.html

--------------

Ford Taurus: Ignition Switch & Steering Column Replacing?

http://repairhelpcenter.blogspot.in/2012/06/ford-taurus-ignition-switch-steering.html

-----------

How to replace Ignition Switch on Acura Car Models?

http://repairhelpcenter.blogspot.com/2011/11/how-to-replace-ignition-switch-on-acura.html

--------------

How to Replace Ignition Switch on Chevrolet Caprice Classic?

http://schematicsdiagram.blogspot.com/2011/12/how-to-replace-ignition-switch-on.html

------------

1995 Ford Taurus: Ignition switch not turning OFF?

http://repairhelpcenter.blogspot.in/2012/06/1995-ford-taurus-ignition-switch-not.html

-----------

Ignition Switch Will Not Turn Off?

http://schematicsdiagram.blogspot.in/2012/04/ignition-switch-will-not-turn-off.html

---------

These will help.

Thanks.

It depends on vehicle to vehicle.But its not very diffult on mot of cars to replace ignition switch.Basic theory of replacing ignition switch is same for all car models.:-----
To replace ignition switch on your vehicle,i suggest you few helplinks with proper ignition switch replacing procedure. View its details and you can replace ignition switch on your vehicle.-------------Click the link below :----------------

How to remove ignition switch on VW Car models?

http://schematicsdiagram.blogspot.com/2011/12/how-to-remove-ignition-switch-on-vw-car.html

-------------

How to replace Ignition Lock Cylinder on Acura Car Models?

http://repairhelpcenter.blogspot.com/2011/11/how-to-replace-ignition-lock-cylinder.html

--------------

Ford Taurus: Ignition Switch & Steering Column Replacing?

http://repairhelpcenter.blogspot.in/2012/06/ford-taurus-ignition-switch-steering.html

-----------

How to replace Ignition Switch on Acura Car Models?

http://repairhelpcenter.blogspot.com/2011/11/how-to-replace-ignition-switch-on-acura.html

--------------

How to Replace Ignition Switch on Chevrolet Caprice Classic?

http://schematicsdiagram.blogspot.com/2011/12/how-to-replace-ignition-switch-on.html

------------
1995 Ford Taurus: Ignition switch not turning OFF? http://repairhelpcenter.blogspot.in/2012/06/1995-ford-taurus-ignition-switch-not.html
-----------
Ignition Switch Will Not Turn Off? http://schematicsdiagram.blogspot.in/2012/04/ignition-switch-will-not-turn-off.html
---------
These will help.
Thanks.

Hi!!

The ignition switch is usually mounted to the steering column and is operated by a linkage rod.

NOTE
On column-mounted ignition switches, don't confuse the switch with the lock cylinder and keys. The ignition switch is not normally visible.
On some vehicles, the steering column support has to be removed and the column lowered to find the ignition switch. On others, the switch is accessible under the dash



The ignition switch is operated by the key switch.

To replace the switch:

• Remove the ignition switch wiring harness.
• Unbolt it from its position.
• Bolt the new switch into position.
• Attach the witing harness.

Don't forget to rate this post!! Good Luck!!

replace the ignition switch
The ignition switch is usually mounted to the steering column and is operated by a linkage rod.
NOTE On column-mounted ignition switches, don't confuse the switch with the lock cylinder and keys. The ignition switch is not normally visible. On some vehicles, the steering column support has to be removed and the column lowered to find the ignition switch. On others, the switch is accessible under the dash.
The ignition switch is operated by the key switch. Courtesy of Ford Motor Company. To replace the switch:

• Remove the ignition switch wiring harness.
• Unbolt it from its position.
• Bolt the new switch into position.
• Attach the witing harness.

your Ignition Switch is bad here is how to replace it
The ignition switch is usually mounted to the steering column and is operated by a linkage rod.
NOTE On column-mounted ignition switches, don't confuse the switch with the lock cylinder and keys. The ignition switch is not normally visible. On some vehicles, the steering column support has to be removed and the column lowered to find the ignition switch. On others, the switch is accessible under the dash.
The ignition switch is operated by the key switch. Courtesy of Ford Motor Company. To replace the switch:

• Remove the ignition switch wiring harness.
• Unbolt it from its position.
• Bolt the new switch into position.
• Attach the witing harness.

The ignition switch is usually mounted to the steering column and is operated by a linkage rod.

NOTE On column-mounted ignition switches, don't confuse the switch with the lock cylinder and keys. The ignition switch is not normally visible. On some vehicles, the steering column support has to be removed and the column lowered to find the ignition switch. On others, the switch is accessible under the dash.



The ignition switch is operated by the key switch. Courtesy of Ford Motor Company. To replace the switch:

• Remove the ignition switch wiring harness.
• Unbolt it from its position.
• Bolt the new switch into position.
• Attach the witing harness.

Its possible that this video can helped (for Explorer)...


Good luck.

Hello 85chevy,
Thankyou for choosing FixYa.com my name is David this should help you with your problem
Home > Product and How-To Information > Product and How-To Information: I > Product

Ignition Switch Inspect | Test | Replace The ignition switch is usually mounted to the steering column and is operated by a linkage rod.
NOTE On column-mounted ignition switches, don't confuse the switch with the lock cylinder and keys. The ignition switch is not normally visible.
On some vehicles, the steering column support has to be removed and the column lowered to find the ignition switch. On others, the switch is accessible under the dash.



The ignition switch is operated by the key switch. Courtesy of Ford Motor Company.
To replace the switch:

• Remove the ignition switch wiring harness.
• Unbolt it from its position.
• Bolt the new switch into position.
• Attach the witing harness.

Look for More Parts A B C D E F G H I
J K L M N O P Q R
S T U V W X Y Z Related Parts: Lock - Ignition (Cylinder and Keys) Return to top.

1. Remove the turn signal and windshield wiper switch.
2. Disconnect the ignition switch electrical connector.
3. Remove the two ignition key reminder switch screws.
4. Remove the ignition switch screws and remove the ignition switch.

Installation

To install, reverse the removal procedure. Check for proper operation of the ignition switch.

Q1. Engine will not start or is hard to start (Cranks OK) A1 -Ignition lock switch faulty -Ignition coil faulty -Power transistor faulty -Spark plugs faulty -Ignition wiring disconnected or broken -Spark plugs faulty Q2, Engine will not crank A2. Battery discharged Battery cables loose, corroded or worn out Transaxle range switch faulty (Vehicle with automatic transaxle only) Fusible link blown Starter motor faulty Ignition switch faulty Ignition lock switch faulty REMEDY Charge or replace battery Repair or replace cables Adjust or replace switch Replace fusible link Repair starter motor Replace ignition switch Replace ignition lock switch