Hello, remove the arm rest--two screw then remove inside door handle--one 10mm
bolt in the back, it is hidden. Check to see if there is other screws on the
door panel and if so remove them.
All screws, arm rest remove (maybe some
time they are screw to the door panel) and inside door handle. Take a long screw
drive (you can buy a door panel removal tool but all it is flat piece of metal
with a slot cut into the end to line up with the panel plastic hold tabs. With
the screw drive gently pry on one corner and until it pops, now you can see the
other tabs and gently pop those out. Once the door panel is loose just pull up
on the panel to release it from the upper window channel.
The door will
be cover with plastic and black rubberized contact cement. Remove the plastic
from it sticky points. The plastic used as a dust/dirt shield.
I hope this
help you. GB...stewbison
2,973 views
Usually answered in minutes!
×