Question about 1994 Geo Prizm

2 Answers

We just bought a 94 geo prizm a fuse was missing in ECU-IB slot when i put it in the air bag light went on and would not go out even with the car turned off. when I removed the fuse then the car would not start. I have disconnected the - terminal on the batt to reset the computer but this did not help. What do i have to do to get the air bag light out and get the car to start without the 10A fuse in this slot?

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

If the car has airbags in the seat, the wiring to the airbag has probably worn thru, and will need to be fixed professionally. If the light is on, the airbag is most likely non-functional, but be safe and get it checked.

Posted on Nov 02, 2017

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Geo Master
  • 1,397 Answers

The fuse was probably removed purposely due to an electrical short in either the air bag system or alarm system. Have it checked professionally. U will have a dangerous air bag on your hands if u leave it be. Speak to the seller 1st, if possible. Maybe they can compensate u.

Posted on Nov 02, 2017

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

bryant329
  • 125 Answers

SOURCE: 1996 geo prizm

you'll have to pull off the interior panel. window in the up position. on the lock cylinder there is a clip that you have to pull off and an arm that actuates the lock. pop the lock out. reverse to install.

Posted on Sep 22, 2008

tommyboinow
  • 324 Answers

SOURCE: geo prizm 95' engine light on - code 24 - air intake temp. sensor has no power

use an electrical tester with a sharp point tip, and poke through the coating into the wire at every 5".

this is the best wat to test the wiring.

Posted on Nov 26, 2008

  • 1 Answer

SOURCE: Check engine light, will it turn off by itself?

If you want to want to be the handyman, disconnect the negative terminal from the battery and turn your lights on, this will drain all electricity in your car allowing your codes to reset. You should wait 10-15 minutes before reconnecting the battery. The safest way is to take it to auto zone or your mechanic autozone will do it for free and only take about 5 minutes of your time.
Hope this helps

Posted on Dec 02, 2008

  • 9 Answers

SOURCE: unlocking radio for 94 geo prizm

If the radio is displaying LOC then head on over to http://www.delcolockcodes.com and they can unlock it for you. I hope this helps!!!

Posted on Dec 05, 2008

MNfisherman
  • 11896 Answers

SOURCE: 97 geo prizm has fire and fuel wont start

check all your relays with an ohmeter to make sure they all operate. A code would go off usually only if it is an electrical problem. If you are getting fuel and fire, and no codes it is most likely a relay. If you did have codes then I would say sensor. So check those relays

Posted on Feb 04, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

94 Geo Prizm throttle body 3 hoses go where and to what ?


what engine, again. 2 anon post, i bet. both missing engines(3) ITS A COROLLA IN DRAG
its for smog so. yah, not all cars SAME.
open hood
look up and under , if a usa car, see that BIG EPA vac,
map, covers only smog related vacuum,
see it?

3 engines
3 countries, usa fed,PR of Calif,and canada.
so 9 published mapsad66c891-7a7f-407e-b753-3bdb7e3503ad.png

Dec 27, 2016 | 1994 Geo Prizm

1 Answer

I have a geo prizm and I replace the cluster, after that air bag ligth is on, how can I reset the air bag light


Did you purchase a new/ refurbished cluster? If so, then you need to have the codes read for the SRS/air bag..

Oct 15, 2016 | Geo Cars & Trucks

1 Answer

Does a 1993 geo prizm 1.8L lsi have two temp sensors?


buy the manual. and RTM,
and yes, Air , water, and on a stock car up to 3 coolant sensors.
The ECT runs the ECU. tells ECU coolant temp.
my guess is the coolant gage is dead? RTM
on most 93 car, the Guage has its own sensor, (isolated)

89-02
joint venture, GM/toyota with 3 engine used.
1.8L or 1.6L
toy engine, 4aFE, 7AFE or 4AG
open hood look
or use the GM RPO tag
or Use the VIN to find motor used.
for docs?
ebay
search
Geo Prizm factory service manual, Duh?

http://www.ebay.com/sch/i.html;jsessionid=D19D723C2EDB4A9FE12E7C01C0677129?_sacat=0&_nkw=geo+prizm+shop+manual&_nkwusc=geo+prizm+shop+manaul&_rdc=1

Feb 18, 2013 | Geo Prizm Cars & Trucks

1 Answer

Door sensor stays on even when doors closed and key is off in 94 geo prizm


because the switch is stuck or wires shorted to it.

Jan 19, 2013 | 1994 Geo Prizm

1 Answer

I have 1997 geo prizm and i need to reset the airbag light.but i don`t know how to do it?


bags are complex tech.
there is no reset, but you can pull the battery neg lug
for 5 to 15minutes. and then try.
the air bags have huge caps in side that hold a huge charge.
just pull it , watch TV , then go back and put it all back and pray.

or read this.
alldata.com

discounted link
http://www.scantool.net/software/alldata-diy-1-month-subscription.html

Dec 15, 2012 | 1997 Geo Prizm

1 Answer

I have a 93 geo prizm that has no dash or interior headlights and will not turn over. My headlights work, however. I left my keys in it, but I'm not sure if it was on or using any juice. I went


You may have damaged the vehicle's ECU, or electrical circuits. Check all fuses and main fuses. Crossing the jumper leads can have very serious consequences.

Nov 01, 2012 | Geo Cars & Trucks

1 Answer

94 geo prism, the battery light comes on. put in a new battery ,light is still on, has a new altenator all connections are tight.what next


Put a volt meter on it and be sure you are charging. Glad it stopped overheating on you. There are also fuses in the fusebox that are part of the charging system to check as well.

Jul 26, 2010 | 1994 Geo Prizm

1 Answer

94 geo prizm cv joints gone bad.Was driving car made some type of winding sound.Now car wheels wont roll or spin even with car up in the air?


You didn't say if it was automatic or manual, but I think your problem is really your transmission. Put the wheels back on the ground, grab the shafts and try turning them. If they don't turn or move around excessively, you can safely eliminate the CV joints.

Feb 23, 2009 | 1994 Geo Prizm

1 Answer

None of the light in my 94 Geo Prizm's radio work. I can not see the staion nor the clock. The radio however still works. Is there a bulb or an LED that can be replaced?


the same thing happened to my 94 geo...
but i just turned it off and turned it back on
it works now and hasnt done it since
now im having a problem with my tail lights not working
and i cannot find the fuse anywhere...
both are out so i assume it isnt the lights themselves

Feb 22, 2009 | 1994 Geo Prizm

Not finding what you are looking for?
1994 Geo Prizm Logo

Related Topics:

84 people viewed this question

Ask a Question

Usually answered in minutes!

Top Geo Experts

Marvin
Marvin

Level 3 Expert

85020 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Geo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...