Hello! The first two codes are indicating the engine is running to lean...A vacuum leak or a dirty Mass Air Flow (MAF) sensor can cause these codes...The third code is a communication error between ECM (Computer) and ABS (automatic Braking System)...Lets put that one on the back burner...Perform the following and send a comment with results...
Check for loose or broken vacuum lines...Follow diagram under hood...
The MAF is located between the air filter and the throttle body...It can be cleaned, If contaminated with debris or if you are using an after market air filter, with oil....Remove MAF (see photo below) and spray with electronic parts cleaner (sold at auto stores and Radio Shack)...Then replace...Clear codes by disconnecting battery for 5 minutes...Make sure you have your radio code before disconnecting battery...
Guru.....Saailer
I’m happy to help further over the phone at https://www.6ya.com/expert/david_6df67de3b14de867
644 views
Usually answered in minutes!
×