Question about 1994 Jaguar XJ6

1 Answer

How do you clear check engine light on 94 jaguar xj6 after getting fuel fail code 14

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 693 Answers

First off, you might need to actually have your engine checked. However, if you know that the engine is in good shape and you're still seeing that pesky check engine light in your Jaguar XJ6, here's a cool trick for how to turn it off.

  • Remove the passenger's side dash liner.

  • Look for the round red connector with a single pink/red wire that is hanging free.

  • Turn on the ignition but do not start the car and then press the VCM button.

  • When the code displays, use a jumper wire to short the pink/red wire to ground for 3 seconds.

  • Turn the key off for 10 seconds and then turn it back on and check for any more stored codes.

  • If there are more use the same procedure to clear them.

Posted on Oct 17, 2011

  • TGlenn Jan 15, 2012

    i had the same problem back in 2006,i took my 94XJ6 VDP to jag dealer and without them even pulling it in for a diagnose one of the mechanic told me exactly what was causing check engine light to continue come on and off like that and told me to replace the valve solenoid (solenoid valve) which cost me about $ 144.00 bucks shipping incl.have not saw that light come on since. hope that helps.its a little blue gadget about the length of ones trigger finger that just plugs right in.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can i disconnect battery cables to clear check engine light on 1991 jaguar xj6?


if the problem has been fixed it may work...check engine light useually indicates a sensor has failed..

Aug 21, 2012 | 1991 Jaguar XJ6

1 Answer

How do I reset the computer on 1988 xj6 jaguar


TO RESET ECM ON A 1988 XJ6 JAGUAR.YOU DISCONNECT NEGATIVE BATTERY CABLE FOR 30 SECONDS TO CLEAR CODE.THIS WONT DO ANY GOOD IF YOU HAVE A ECM TROUBLE CODE DONT FIX PROBLEM.CHECK ENGINE LIGHT WILL STAY ON, UNTIL YOU FIX FAULTY COMPONENT OR SENSOR.

Sep 14, 2010 | 1988 Jaguar XJ6

2 Answers

What does it mean:Fuel 44 Fail in the VCM in a jaguar 1991 xj6 sovereign?


Code 44 means that the oxygen sensor is signaling the computer that the fuel mixture is bad - too rich or too lean.

Apr 09, 2010 | 1993 Jaguar XJ6

4 Answers

Jaguar xj6 1995 starting & go for 15 mins


Does check engine light or wrench light come on? If yes, get free computer scan from Autozone or other parts store that offers free scan. Sounds like a sensor is failing

Mar 11, 2010 | 1995 Jaguar XJ6

1 Answer

1996 jaguar xj6 dtc test code p1178


Fault code P1178Rich Fuelling Trim, Long Term (AMFR)Check for manifold air leaks, rectify as necessary Check for recorded MAFS fault code, rectify as necessary Clear fault code and perform service drive cycle to verify fault cleared Contact Jaguar Service Hotline if fault still present.

Taken from the Jag service manual.

Feb 26, 2010 | 1995 Jaguar XJ6

1 Answer

What does the check engine light vcm code "fuel 14 /fail 14" mean on my jaguar xj6?


this has to do with the engines ability to warm up and meter the fuel. either the thermostat is sticking or the coolant temp sensor is out of range. there are 2 of them at least, one for the guage and one for the pcm. if you find it is the t-stat sticking, replace with jaguar parts.

Nov 15, 2009 | 1992 Jaguar XJ6

2 Answers

Check engine light VCM code "FUEL 14"?


my manual says fuel fail 14 deals with yourr coolant temperature sensor is no in operating range

Nov 02, 2009 | 1992 Jaguar XJ6

2 Answers

94 jaguar fault code fuel fail 12


Check MASS AIR FLOW SENSOR , try to get a used one and fit to the car , it is very easy to install. And by the way the MASS is the part that is in connection with the air filter , the one that has an electrical connector. When installing make sure that it is tight and no leaks. This answer was based on your description and code supplied hope this would help

Jul 08, 2009 | 2005 Jaguar XJ-Series

1 Answer

Jaguar 1994 xj6 engine fuel fail code 44


Hi

Lamba Sensor Faulty. (Oxygen Sensor) On the exhaust down pipe.

Good Luck !

A FixYa would be nice... Thanks.....John.

Feb 23, 2009 | 1994 Jaguar XJ6

1 Answer

FUEL FAIL 14 CODE 14


this is the most common error code, just means the one of the nods in fuel pump misfired, on every model other than the ones for usa market, after clearing the error code on vcm the check engine light would reset. for our cars its programmed to stay on.
also get fail 17 fuel 17 same thing
it will not effect the running of the car or its performance
may run a little rich

Dec 31, 2008 | 1994 Jaguar XJ6

Not finding what you are looking for?
1994 Jaguar XJ6 Logo

1,893 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jaguar Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Marvin
Marvin

Level 3 Expert

85108 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Jaguar Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...