2006 Montana, I am trying to remove the kick panel on the passenger side of the dash. I want to rivit a piece of aluninum to it because the valcove tape won't stick to plastic.
SOURCE: 2006 Pontiac Montana rear brake lights and signal
check the ground in the fuse link also take out the rear tail light lens and make sure you don't have a broken or damage wire on the socket itself
SOURCE: cooling light
Looking at the location, it should be by the thermostat housing.....this is a pic of what it looks like.....and you can sort of make out the thermostat housing area also:
SOURCE: the cd/dvd/ radio player in my 2006 pontiac
CHECK THE RED WIRE COMING FROM THE BACK OF RADIO AS IT HAS A FUSE CONECTER SO CHECK THE FUSE HAS NOT BLOWN .
SOURCE: Changing the front brake pads on a 2006 Pontiac Montana SV6
Use a z clamp,Or us big azz pliers,Or use a hammer handle and put one of the old pad in and put the hammer handle in the and twist it will work.I hope this helps
SOURCE: 2000 pontiac montana doesn't start and security
Very common problem on these cars. Do you have another key you can use? Try it. If not take the key ou have been using and turn ket to the on posistion. Leave it there on for ten to fifteen minutes. The computer will relearn the chip code on key. When light stops blinking you know it is done. Turn key to off wait ten to fifteen seconds and turn key to on position, Security light may blink once or twice then it should stop.. Try to start vehicle. It should start. If it doesn't then you may need whats called a new passlock and possibly key reprogramming. Which can only be done at the dealer most of the time. Hope car starts with the first procedure. Let me know if it works.
1,496 views
Usually answered in minutes!
×