- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Pull lower hose off thermostat housing. Unbolt the 2 thermostat housing bolts(7mm or 8mm). The remove thermostat and replace with new one with new seal. When filling cooling system there is a bleeder plug on right side of engine. 7mm bolt needs to be removed and when coolant comes out replace plug.
You will need a 7mm and 8mm sockets,ratchet and side cutters. 3 7mm bolts hold the glove box on dash. remove glove box,easier to see. remove 3 8mm screws holding blower motor on. remove clip holding fan blade on with side cutters, reinstall. Good luck.
it is usually a 8mm spanner but thruogh time they corrode down have you got a pair of vise grips if you do use them to grab bolt & slacken that way would also advise to replace rear wheel cylinder bolts too.
×