Have a 2004 kia sedona have replaced the crank position sensor but still shuts off and gives p 0335 code

Sorry on this but these vehicles are only sold as diesels here with mainly manual gearboxes ,to find the fault though i would test everything with my automotive multimeter as the OBDII connections on these vehicles only have a 12v feed on our europeon versions and the kia diagnostic plug under the bonnet is used by the dealer ,No chance of pulling any codes on this vehicle for myself here in spain

WHAT CKP SENSOR DID YOU REPLACE I BELIEVE THE SEDONA 3.5L ENGINES HAS 2 CKP SENSORS.YOU HAVE ONE CKP SENSOR LOCATED FRONT OF ENGINE ON THE OIL PAN MOUNTED BEHIND CRANKSHAFT PULLEY AND THE OTHER CKP SENSOR LOCATED NEAR THE TRANSMISSION BELLHOUSING. CHECK TO SEE IF YOU HAVE CKP SENSORS. IF NOT CKP SENSOR WIRE COULD BE DAMAGED.ALSO CHECK TO MAKE SURE BATTERY POWER GOING TO CKP SENSOR B PLUS WIRE IF NOT CHECK THE ECCS RELAY OR FUSES MAKE SURE POWER IS GOING TO CKP POSITION SENSOR