My winter and power button on my 2000 honda passport are stuck and it is ingaged in winter mode how do i fix that

Winter mode changes it for slippery conditions, to where it starts out in third gear, to get better traction starting out.

you need the master switch which is on the drivers door it will either pop up and out or you will need to remove the door panel to change it upon prying up on the switch if it doesnt come out move to removing the door panel

Hi
I would think you either have a fault control unit in door or a poor connection.
Roger

need to let a transmission shop code scan transmission for a transmission shift solenoid fault code or a mechanical problem.transmission has to be diagnostic scan because you have many solenoids if you have solenoid problem scanner will give you a code see no code could have transmission mechanical problems.

WINDOW CONTROL SWITCH BUTTON WORN MORE LIKELY WHEN BUTTON STICKING IT WILL A TIME SWITCH WILL STOP WORKING.

Four wheel High is what you need to use in snow. It is similar to your regular driving experience but your speeds should not exceed 45-50 mph. Shift through your normal gears as necessary and drive with appropriate caution. Four wheel High should be used only as long as driving conditions warrant, using it otherwise can cause unnecessary wear on your transmission and drive-train as well as lower fuel economy.

Four wheel low is used for pulling out of a ditch if you are stuck, going through deep mud or rock crawling. Four wheel low will also cause your vehicle to lurch every time you press the gas pedal.

Winter mode - Starts in 3rd gear to reduce slippage on ice or snow
Power mode has a delayed upshift when more powerful acceleration is required

traction control

if im not mistaken the power button is used for towing the winter button is used for adverse wearher conditions such as snow -ice etc.(4wheel drive)

Replace window regulators. They are broke.