Question about 2008 Honda Accord

1 Answer

Which are the functional iat sensor wires on an accordd 2008

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,803 Answers

It all depends on which engine your Accord is equipped with. This is really nice-to-know information when you are asking somebody for help with your engine control circuits.

For the 2.4L engine: At the MAF/IAT sensor connector, Pin #4, GREEN/BLACK is the "sensor ground" and Pin #5, RED/YELLOW is the "sensor input" for the IAT.

For the 3.5L engine: At the MAF/IAT sensor connector, Pin #1 GREEN/YELLOW is the "sensor ground" and Pin #2 RED/YELLOW is the "sensor input" for the IAT.

Posted on Oct 05, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2008 Pontiac G5 I was wanting to install a performance chip to it. It says to connect it to the IAT senor which has 5wires witch wires are for the IAT


The other three wires are for the Mass air flow sensor . That's a new one for me , performance chips or turners are used through the DLC . You program the engine computer . I have no idea what they can do from the intake air temp. sensor .The tan an lit blue wires are for the IAT sensor !

Oct 15, 2015 | Pontiac Cars & Trucks

1 Answer

What color is the 2 wires that control the IAT on a 2008 Vue XR 3.6L VVT


The tan and Light blue wiresmaremfor the IAT.

I’m happy to assist further over the phone at https://www.6ya.com/expert/jeremy_d728a59f986299fa

Aug 15, 2012 | Saturn Cars & Trucks

1 Answer

I have a 2008 Ford fusion and I need to know what wire go to the Iat sensor


Trying to "soup-up" your tiny little 4-banger by by-passing the IAT? My recommendations are DON'T DO IT! You are opening a can of worms that you may not be able to afford in the not-so-distant future.

However, who am I to tell you how to waste your money?

The IAT signal input to the PCM is Pin #1 VIOLET/GREY at the MAF/IAT sensor connector.

Mar 06, 2012 | 2008 Ford Fusion

1 Answer

I have 3 codes po431 po103 and po113


P0103 Mass or Volume Air Flow Circuit High Input P0113 Intake Air Temperature Circuit High Input P0431 Warm Up Catalyst Efficiency Below Threshold (Bank 2) A code P0431 may mean that one or more of the following has happened:
  • The catalytic converter is no longer functioning properly
  • An oxygen sensor is not reading (functioning) properly
  • There is an exhaust leak
A code P0113 may mean that one or more of the following has happened:
  • Internally failed IAT sensor
  • Faulty connection at IAT sensor
  • Open in IAT ground circuit or signal circuit
  • Short to voltage in IAT signal circuit or reference circuit
  • IAT harness and/or wiring routed too close to high-voltage wiring (e.g. alternator, spark plugmag-glass_10x10.gif cables, etc.)
  • Faulty PCM (less likely but not impossible)
A code P0103 may mean that one or more of the following has happened:
  • The MAF may be disconnected, or a wiring connection may be bad
  • The MAF sensor may be damaged
  • The vehicle computer may be faulty (very rare)

May 25, 2011 | 2006 Mazda 6

2 Answers

I have and error code of p0113


A code P0113 may mean that one or more of the following has happened:

  • Internally failed IAT sensor
  • Faulty connection at IAT sensor
  • Open in IAT ground circuit or signal circuit
  • Short to voltage in IAT signal circuit or reference circuit
  • IAT harness and/or wiring routed too close to high-voltage wiring (e.g. alternator, spark plugmag-glass_10x10.gif cables, etc.)
  • Faulty PCM (less likely but not impossible)

Jan 28, 2011 | 2008 Mazda Tribute

1 Answer

How to check a 2009 chev cobolt MAF/IAT 5 wire sensor and what should i get for my reading for the 5 wires/


what color are the two wires for the maf/iat sensor in a 5 wire plug on a 2008 cobalt LS 2.2L?

Mar 06, 2010 | 2009 Chevrolet Cobalt

1 Answer

2008 ranger 3.0


the IAT is not controlled, it simply provides information to the PCM about the temperature of the air entering the engine, this is required to inject the correct amount of fuel, air density is affected by air temperature.

Apr 06, 2009 | 2008 Ford Ranger 2WD

1 Answer

Sensor IAT


where is IAT sensor located in toyota yaris?

Apr 01, 2009 | 2007 Toyota Yaris

1 Answer

2008 E-350 IAT sensor wires


is this what you recieved?9af2263.jpg

Nov 11, 2008 | 2002 Ford E350

1 Answer

IAT Sensor


IAT is integral to the MAF sensor located on the air cleaner housing

Aug 21, 2008 | 2008 Jaguar X Type

Not finding what you are looking for?
2008 Honda Accord Logo

435 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Marvin
Marvin

Level 3 Expert

85178 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...