The input speed sensor is pretty easy to find.
With the hood open and standing in front of the van you should see the transmission on the drivers side of the vehicle. look under the two transmission cooler lines that are connected to the transmission. You will see a two wire connector plugged into a light brown/cream colored sensor. That is the input speed sensor. Usually the lines need to be removed in order to replace it. A one inch socket or wrench will also be needed to loosen/tighten the sensor.
Eventually you will be asking about the output speed sensor. It looks exactly the same as the input. It is located to the right (drivers side) of the input speed sensor as you standing in front of the vehicle. It is usually easier to see/access/replace from under the vehicle.
I’m happy to assist further over the phone at https://www.6ya.com/expert/jeremy_d728a59f986299fa
607 views
Usually answered in minutes!
×