The motor is spinning but the window will not roll up. Where can I find a diagram of the door panel to troubleshoot?
Don't know why but the glue gets weak where the plastic pieces attach to the bottom of the window.i've had to fix mine more than once.remove the door panel,then take the nuts lose from the back of the plastic retainers,then-going by the residue left from the old glue mark where the retainers go back-re glue,realine and reinstall.panel removal-philips screw holding the door handle,1 philips screw holding armrest/window controls,two philips screws at front of panel above speaker,then gently pry clips behind the edges of the panel.if the plastic window retainers are beyond repair,i think they have them in the help section of advance/autozone.
1,912 views
Usually answered in minutes!
Can you tell me how to fix the window regulator? I was hoping to find some type of diagram to follow.
Saturday my driver's side window wouldn't raise. Motor worked, but window stayed down. I took off the interior door panel and had no idea what to do next since a round piece of plastic fell out when I removed the panel. I couldn't determine where it came from. I took it to a garage (not the dealer) who told me the regulator was bad and that it is a "dealer only" part. I had them raise the window, and I've taped over the controls so I don't accidentally put the window down. Don't want to spend the money they want to fix it- so I guess I'll just have to do without fresh air for now.
×