Have a 2001 Ford Ranger 4x4, clutch goes to floor to pressure at all, will not go into gear.
Changed Slave Cylinder, still nothing.
Bought a Clutch Kit and and replaced Pressure Plate and clutch, still nothing.
Any advice help on what to check next would be grealy appreciated.
Have you check the slave cylinder to see if its moving when someone puts there foot on the clutch.
And check the adjustment on the master cylinder.
1,494 views
Usually answered in minutes!
Slave Cylinder is moving when Clutch is depressed and master cylinder seems fine.
I am so stumped...
REPLACED CLUTCH SET & SLAVE CYLINDER STILL WILL NOT GO INTO GEAR
it worked fine after changing the clutch plate and pressure plate but a few days later it stared grinding the gears
what else can be the proplem
replace clutch salve cylinder
Replaced the clutch and pressure plate and cannot select any gears
I have an 84 ford ranger 4 cylinder and I replaced the slave cylinder does the slave cylinder have like a keeper that holds it in place or does it supposed to slide and turn to lock in place then put the dust cover?
×